Little-Miss Posted November 2, 2010 Posted November 2, 2010 Anything i can help troubleshoot it? Going to go check the lights in the cab in a second. If i ping curricsvr1 from my machine i get 25-50% packet loss If i ping curricsvr3 from my machine i get the same.... If i ping the admin server its fine!! All on same domain. When im remoting to my servers there is a delay. I was trying to create an image when i noticed there was a problem. I restarted curricsvr3 buts its still the same... Help! Any ideas?
featured_spectre Posted November 2, 2010 Posted November 2, 2010 I am having the same issue, only I am unable to ping to my router from a handful of machines, I tried swapping cables, changing ports on switches etc to no avail...getting frustrated now!
Little-Miss Posted November 2, 2010 Author Posted November 2, 2010 Argh! ok...now everyone has gone to assembly it seems hunky dory!! Odd cus i find it highly unlikely they have logged off! No errors in log!
FN-GM Posted November 2, 2010 Posted November 2, 2010 Do you have any loopbacks? Sounds like there could be one about.
garyjepp Posted November 2, 2010 Posted November 2, 2010 Capture a couple of thousand packets of network traffic using Wireshark or something similar and see if you can spot any glaring problems, maybe? It's the first thing i do when our network's on a go-slow.
Little-Miss Posted November 2, 2010 Author Posted November 2, 2010 Not sure need to look. This happened at the beginning of the year and it fixed itself before i could do any troubleshooting. How do i troubleshoot a broadcast storm for instance?
Little-Miss Posted November 2, 2010 Author Posted November 2, 2010 Capture a couple of thousand packets of network traffic using Wireshark or something similar and see if you can spot any glaring problems, maybe? It's the first thing i do when our network's on a go-slow. Eek! Where do i start with wireshark! 1
RobFuller Posted November 2, 2010 Posted November 2, 2010 Check there isn't a speed mismatch on the switch ports, set to auto until you find the fault.
Little-Miss Posted November 2, 2010 Author Posted November 2, 2010 I got a load of this... 342707 215.359269 Curric3 IP Curric1 IP TCP netbios-ssn > 1491 [ACK] Seq=1366410 Ack=262282860 Win=65535 Len=0 542004 332.661999 Curric3 IP Curric1 IP SMB Write AndX Response, 15796 bytes Means NOTHING to me lol!!
Resolver Posted November 4, 2010 Posted November 4, 2010 As unlikely as people seem to think it is, I always look for duplicate IP addresses. unplug the real server for a few seconds, ping it, see if anyone answers from the servers IP address. Have you tried pinging from the good servers to the bad, and then vice versa? Might give some insight depending on the results. 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now