karldenton Posted June 15, 2009 Posted June 15, 2009 Hi, Was just wondering what causes High Collision or Drop rates on HP Procurve 2524. Its always on the same port. We also get excessive CRC/Alignment errors on the same port. Thanks Karl
Butuz Posted June 15, 2009 Posted June 15, 2009 Half / Full duplex mismatch. Or could be the network interface of whatever is connected is malfunctioning. (e.g PC network card). What is connected to that particular port - do you know? Butuz
karldenton Posted June 15, 2009 Author Posted June 15, 2009 Hi, The 2 ports in question, there are just a pc connected to both of them ! Errors don't occur all the time but every few days. Network seems to be slow over them.
binky Posted June 15, 2009 Posted June 15, 2009 We are having the same issues, brand new hp switch, brand new hp computers, brand new CAT6 cabeling, and old CAT5e patch cabels. Is there any way to fix the duplex thingy with a script?
DevilsAdvocate Posted June 15, 2009 Posted June 15, 2009 (edited) We are having the same issues, brand new hp switch, brand new hp computers, brand new CAT6 cabeling, and old CAT5e patch cabels. Is there any way to fix the duplex thingy with a script? You'd have to hard code the duplex on the switch, which would involve going under each interface and changing the duplex to Full or Half, whatever you're after. Hi, The 2 ports in question, there are just a pc connected to both of them ! Errors don't occur all the time but every few days. Network seems to be slow over them. I'd suggest swapping the NIC's in the PC's, changing the cables to the wall jack and hard coding the duplex on both the ports in question. Edited June 15, 2009 by DevilsAdvocate
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now