Cisco AP 1230

[imiddleton25]

We have 30 Cisco 1230 Ap all working fine set with a wireless vlan ( vlan 6)

and a voice vlan (vlan 7) we have 7921 wireless phones anyway issue is this

I need to add a new ssid and wep key to the 2 exsisting above as you cant use the same vlan id i set this to 8 (unused)

My clients connect to Ap but get no ip address where do i set up the vlan on the AP or the cisco 6500 switch its plugged into??

 

 

thanks

[FN-GM]

We have 30 Cisco 1230 Ap all working fine set with a wireless vlan ( vlan 6)

and a voice vlan (vlan 7) we have 7921 wireless phones anyway issue is this

I need to add a new ssid and wep key to the 2 exsisting above as you cant use the same vlan id i set this to 8 (unused)

My clients connect to Ap but get no ip address where do i set up the vlan on the AP or the cisco 6500 switch its plugged into??

 

 

thanks

 

You will need a DHCP server on the network to get IP addresses.

 

You setup your Vlan on the switch that acts as a server switch and then you trunk the ports your AP's are plugged into so they can use more than one v-lan. (i think i am right)