Xerox Phaser 8400

[Daleus]

Well, we have the very stable Xerox Phaser 8400.

 

It does the job just fine, however recently it will randomly drop off the network.

 

If I put the power in, all through the 'warming up' phase I can ping it, browse the web interface and do whatever I like.

 

Once it is warmed up and ready I can still browse web interface fine, but as soon as ANY print job is sent to it (even 'wgggaaarrrbbblll' in notepad), it starts dropping ping replies, maybe 2 or 3 then come back on. If I send something bigger it will probably print THAT job but will then no longer reply to pings and the web interface won't work anymore. If I shutdown the printer at this point using the front panel just as its shutting down before it cuts its own power off, I get a couple of ping replies!

 

Everytime I try to get into the web interface I don't have enough time because (any network user) tries to print something and therefore it goes offline again.

 

I checked for IP conflicts, wiring (asin network) as well as resetting the config from scratch.

 

if anyone has any ideas it would be great to hear them!

 

 

Oh and before I forget, it will randomly print this out, asif it timed out while recieving a print job

 

ERROR: timeout

OFFENDING COMMAND: timeout

 

STACK:

 

U

-mark-

{! }

where

/Pscript_Win_Data

-mark-

`

-mark-

/initialize

 

*edit, Wrong forum? Network trouble so I bunged it in here, if I made a boo-boo, sorry*

[Daleus]

There was a print job that wouldn't purge from the memory, It sorted itself out after a lot of restarts.

[contink]

There was a print job that wouldn't purge from the memory, It sorted itself out after a lot of restarts.

 

Thanks for sharing the solution.