jmak Posted January 31, 2023 Posted January 31, 2023 My deployment server has been working well, but I've recently had issues with m2 drives. The task sequence runs and the image deploys, but it can't find the bootable device afterwards. One was a custom PC, but I'm having the same issue with Dell Optiplex 7060 and I installed the driver pack in MDT and updated the boot files in WDS. I did have to turn on legacy boot to get it to PXE boot, but I've done that on other models without issue. WDS version 10.0.20348.1 MDT version 6.3.8456.1000 Both patched Any suggestions please?
Oaktech Posted January 31, 2023 Posted January 31, 2023 Sure it's not a secure boot/boot issue later - installing and creating bios partitions on a device that has uefi set in firmware? 1
snagrat Posted January 31, 2023 Posted January 31, 2023 Check that the drive isn’t set to RAID in the bios. That causes driver issues. 2
tech-man Posted January 31, 2023 Posted January 31, 2023 We are seeing this issue as well with 7060's. Watching with interest....
mrwoberts Posted February 1, 2023 Posted February 1, 2023 (edited) +1 for RAID sata bios setting - you may need Intel RST drivers injecting. However, I'd be interested to know whether your setup has worked with RAID in the past (Dell usually have this as default) Here's a link to some info https://www.intel.co.uk/content/www/uk/en/support/articles/000055157/memory-and-storage.html If this is in fact the issue, it makes more sense to switch Sata settings to AHCI, rather than unsettle your working WDS setup. edit: link, and further comment Edited February 1, 2023 by mrwoberts
jmak Posted February 1, 2023 Author Posted February 1, 2023 Thanks for the suggestions. I'm away from that system today - I'll test tomorrow
jmak Posted February 2, 2023 Author Posted February 2, 2023 The first couple of machines I checked were set to RAID so I got quite optimistic, but I changed to AHCI and got the same result. UEFI is deselected, secure boot is set to off Almost our whole estate is Dell. I've had success with older machines which needed legacy boot options turning on and brand new machines with PXE boot built into the UEFI stack. I've also managed Surface Pros and some HP devices which needed a particular driver injecting. I'm fairly concerning it's something to do with these machines or the way their BIOS is configured.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now