garethEds Posted November 29, 2022 Posted November 29, 2022 Morning All, Can anyone help me with deploying Server 2022 via Intelligent Provisioning? I have configured IP on the server and copied the ISO to a USB stick. However IP does not see the ISO file at all. I assume copying hte ISO file means 'flat ISO'. As such I cannot get Windows to install. I'm probably missing something easy. Any help appreciated. Gareth
CHiLL Posted November 29, 2022 Posted November 29, 2022 (edited) It might sound stupid, but are you using the front or rear USB ports? I recently had to reinstall VMware ESXi on my HP DL360 Gen9 and couldn't get it to see the ISO from the front USB (it had a couple of symptoms; It could see the drive, but not the ISO, or it could see both the drive and ISO but report the ISO was not valid). It worked when using the rear ports. Edited November 29, 2022 by CHiLL 1
garethEds Posted November 29, 2022 Author Posted November 29, 2022 It might sound stupid, but are you using the front or rear USB ports? I recently had to reinstall VMware ESXi on my HP DL360 Gen9 and couldn't get it to see the ISO from the front USB (it had a couple of symptoms; It could see the drive, but not the ISO, or it could see both the drive and ISO but report the ISO was not valid). It worked when using the rear ports. Not stupid at all. I'm sure I tried that but am trying again. Deploying a server should not be this hard. If all fails I'll just install from a normal boot USB and install that way Thanks pal. Gareth
garethEds Posted November 29, 2022 Author Posted November 29, 2022 Aaaarghghgh got it working but.... Windows Server 2022 SERVERDATACENTER not supported! FFS. Gareth
CHiLL Posted November 29, 2022 Posted November 29, 2022 Aaaarghghgh got it working but.... Windows Server 2022 SERVERDATACENTER not supported! FFS. Gareth That's strange. I have Server 2022 Datacenter installed on one of our other HP DL360 Gen9 servers. I don't know how it was loaded though, as it was done via a third party at the time.
ITGURU Posted November 29, 2022 Posted November 29, 2022 Just clean install the os and then install the service pack after. I never use the provisioning tool.
ITGURU Posted November 29, 2022 Posted November 29, 2022 Also got 2022 dc running on dl360 g9 and g10 servers here no problems.
jtotheb Posted December 6, 2022 Posted December 6, 2022 Aaaarghghgh got it working but.... Windows Server 2022 SERVERDATACENTER not supported! FFS. Gareth You're probably well past the point of using it now, but even the last released version of Intelligent Provisioning for the Gen9 only supported Windows Server 2019 so if you were thinking of trying to update IP don't bother.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now