talksr Posted March 25, 2022 Posted March 25, 2022 Hi there, I have had a member of staff come to me with their iPad stating that lines are showing at random times. iPad is quite old being a Mini 2, no damage anywhere, screen all good, no damage. Fully up to date. It took some time to get it to exhibit the issue, I managed to trigger it by turning down the brightness. I am assuming this will need a new screen. I don't really feel it is economical to repair, this one is not owned by the school, but by the teacher themselves. Has anyone had this issue happen before? She is only using it for basic internet browsing, so although it is an old model, it is serving a purpose, but I am just conscious that to replace the screen might be half or more of the entire value of the device. Any suggestions and thoughts would be great.
kidpressingbuttons Posted March 25, 2022 Posted March 25, 2022 Have seen this before- Dropped it and it worked fine since.... 1
Cat_Jam148 Posted March 25, 2022 Posted March 25, 2022 (edited) Used to get an issue similar to this quite a bit on our old iPad 2s Required a little bit of 'percussive' maintenance. Lay flat on the table and forcefully hit the back with a large book. I believe it was down to the display cable becoming slightly loose so this knocked it back into place. Take care if you attempt this, I never damaged an iPad doing this but always felt like it could've. Good idea to let the staff member know if you plan on doing this. Edited March 25, 2022 by Cat_Jam148 1
j224 Posted March 25, 2022 Posted March 25, 2022 Yeah, same as others have said. It happens frequently with the older iPads. I drop them from a foot or so off the ground, flat onto their back and bingo!
Koldov Posted March 25, 2022 Posted March 25, 2022 General consensus is usually to hit it (no not with a hammer this time surprisingly)... a gentle (ish) tap to the rear of the device. http://www.edugeek.net/forums/netbooks-pda-phones/226680-ipad-blurring-ghost-screen.html Alternatively, if it comes and goes according to brightness, has the user got auto-brightness on? If so, can you turn that off and set it at a level where they don't appear (but is still useable)? 1
jmak Posted March 25, 2022 Posted March 25, 2022 . Good idea to let the staff member DO IT THEMSELVES! Fixed that for you. 1
talksr Posted March 28, 2022 Author Posted March 28, 2022 Thank you everyone, that is really helpful, I will pass this info on today
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now