MC4200 logging User 802.1x Authentication Failure errors but we're not running RADIUS

[JFSR]

We recently had to completely rebuild our controller configuration from the ground up.

Since then clients take unusually long to connect to our single SSID. While observing an Android phone attempting to connect, it will try 4-8 times before either displaying "Problem authenticating", or starting over. Sometimes the devices connect first attempt... no pattern.

 

checked the Event Log on the MC4200 and find hundreds of entries

 

[TABLE=class: sortTable, width: 100%]

[TR]

[TD=class: table_col]User 802.1x Authentication Failure[/TD]

[TD=class: table_col]Major[/TD]

[TD=class: table_col]Access point[/TD]

[TD=class: table_col]SD-ST-20-BISD-f0:27:65:fb:8f:03[/TD]

[TD=class: table_col]09/29/2020 09:14:59[/TD]

[TD=class: table_col]Access Request rejected for Calling Station ID: , Authentication Type: <802.1X>, Reason: [/TD]

[/TR]

[/TABLE]

 

AP320's

 

Profile: WPA2/PSK AES, captive portal disabled

 

8 campuses on their own VLAN/ESS profiles

 

Virtual Port

Edited September 29, 2020 by JFSR

[JFSR]

anyone...?