Boot error

[atds99]

I put an image i created created on two identical computers, one of these boots straight onto the Windows 10 operating system the other is experiencing an error.

Where the info section for the error is it says "The boot selection failed because a required device is inaccessible" however when you press enter it boots correctly. any way around this error?

 

Thanks

[noelmm]

You have said the machines are identical but have you checked bios settings on both machines match?

[bald_pig]

How did you create this image? It sounds like you have just cloned the drive, which won't work as there are low-level bits of Windows that need to be unique, such as the drive identity, which is what usually causes that error.

[atds99]

I used aconis backup 11.7 and have put the image onto 4 computers and has worked, just having issues with the boot on that one. i have checked and all the bios settings are the same

[noelmm]

I've had something similar before when I have cloned a drive and then had to go and make the drive partition active however I don't think this is your issue. Have you tried to repair the boot record, it may be corrupt? Take a look at this link for http://support.microsoft.com/kb/927392