witch Posted September 17, 2019 Posted September 17, 2019 The school has just gone up to Windows 10 and one of the Yogas failed. I have replaced the hard drive and the yoga see it perfectly. BUT when I try to image it wont boot from LAN Is there a setting somewhere that I need to change in order to be able to image it? (vague memories of something like that in the past)
Norphy Posted September 18, 2019 Posted September 18, 2019 Does the device have a built in NIC or are you using a USB one? What are you using for imaging?
CHiLL Posted September 18, 2019 Posted September 18, 2019 We have two Lenovo Yoga 11E devices, but neither are on-site. I don't think I did anything special to them when we migrated to Windows 10 a few years ago and they've been PXE booting for SCCM fine. I'll try and get hold of one and check the BIOS settings. 1
Arthur Posted September 19, 2019 Posted September 19, 2019 Is there a setting somewhere that I need to change in order to be able to image it? (vague memories of something like that in the past) Do you have the UEFI IPv4 Network Stack enabled? I'll try and get hold of one and check the BIOS settings. Lenovo have a web-based BIOS simulator if that helps? https://download.lenovo.com/bsco/index.html 1
witch Posted September 19, 2019 Author Posted September 19, 2019 I dont have the above screen. All it has is Wake On LAN and Ethernet LAN option ROM [Enabled] nothing about UEFI at all
snagrat Posted September 19, 2019 Posted September 19, 2019 I dont have the above screen. All it has is Wake On LAN and Ethernet LAN option ROM [Enabled] nothing about UEFI at all Is secure boot enabled?
CHiLL Posted September 19, 2019 Posted September 19, 2019 (edited) I dont have the above screen. All it has is Wake On LAN and Ethernet LAN option ROM [Enabled] nothing about UEFI at all Using the link @Arthur provided (our 11e come up as ThinkPad Yoga 11e (20D9 20DA) in that list) and I compared the settings to what our 11e is actually configured with and attached the settings here. [ATTACH=CONFIG]55028[/ATTACH] [ATTACH=CONFIG]55029[/ATTACH] [ATTACH=CONFIG]55030[/ATTACH] [ATTACH=CONFIG]55031[/ATTACH] What happens when you press F12 at boot? Do you see the NIC? Edited September 19, 2019 by CHiLL
witch Posted September 19, 2019 Author Posted September 19, 2019 Yes I do Re your screens - I have no network stack 2nd one is the same 3rd is the same but I am wondering if secure boot should be disabled 4th UEFI/Legacy is set to both
CHiLL Posted September 19, 2019 Posted September 19, 2019 4th UEFI/Legacy is set to both That's weird. Because I have secure boot enabled, I can't configure the UEFI/Legacy section as it's greyed out. If I turn off Secure Boot, I can then configure it. I haven't changed these BIOS settings in a couple of years and I re-imaged both of them via PXE boot over the summer.
witch Posted September 19, 2019 Author Posted September 19, 2019 I disabled secure boot and now it is going into WDS (the old way) and not MDT!!!!!
Arthur Posted September 19, 2019 Posted September 19, 2019 Is the Yoga 11E the first UEFI device you are PXE booting at that school? Could the issue be related to your DHCP Options or IP Helper settings?
witch Posted September 19, 2019 Author Posted September 19, 2019 No - there are 65-odd other Yogas that were imaged during the summer. This one's hard drive failed so I replaced it, and here we are
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now