Hyper-V and VLANs

[Frazzle]

I am trying to utilise VLANS with Hyper-V.

 

I have a virtual server that sits with a static IP address in VLAN20. I want to set this up as a 3CX server.

I want it to talk to phones that also sit in VLAN20

 

I have successfully added the phones to VLAN20 by tagging the relevant ports on the relevant switches. The phone get an IP address in VLAN20.

 

Does anyone know how I would set this up in HyperV? I have tried going into VM>Settings>Network Adaptor and enabling VLAN ID to 20 but this doesnt seem to give any connectivity.

 

The physical host sits in VLAN10 which is our main Data VLAN.

 

Anyone know how to do this please?

[PotNoodleTech]

Sound like you have added the Vlan to the virtual machine, but not on the actual host itself.

 

On the switch that the hyperV host is plugged into, you have to also Tag the port with Vlan20.

[Frazzle]

Sound like you have added the Vlan to the virtual machine, but not on the actual host itself.

 

On the switch that the hyperV host is plugged into, you have to also Tag the port with Vlan20.

 

Yes I have added the VLAN to the virtual machine and not on the host itself.

 

I have also tagged VLAN20 on the switch port that the physical host connects to on the physical NIC that is mapped to the Virtual Switch that the VM connects to.