Managing Unifi Airvision cameras with NVR controller on a different subnet

[MrWu]

yesterday

 

Hi all

 

im not sure whether it’s the recommended way of doing this but I have 2 PCs running AIrvision software 3.9.7

 

these PC (well mini servers) have dual NICs so one connects to my main LAN and the other again the main LAN but on a different subnet. Both Servers are on Windows AD. So the 10.18.96.x is where I access Airvision web console and some cameras are on 200.10.0.x... I have a few cameras that are on the 10.18.96.x address and I would like to migrate them to the other subnet.

 

please note it’s not segregated VLAN for now I haven’t got round to doing this yet.

 

now I put 4 x G3 that are new with 200.10.0.x IP address and Airvision adopted them perfectly .. gaining confidence I tried to migrate an existing G3 to 200.10.0.x from 10.18.96.x address and it won’t adopt but stuck on status : managing ...

 

i tried..

 

reseting G3 back to factory - no joy

maually adding the server IP address directly on the G3 - no joy

maually adding adoption token on the G3 - no joy

 

it does seem to be a subnet problem because if I revert this old G3 back to original subnet it gets adopted no issues..

 

whats driving me mad is how come I setup 4 new G3 cameras with 200.10.0.x address and it has been adopted fine and managed and recording with Airvision on 10.18.96.x perfectly fine or weeks?

 

any ideas?

 

thanks!