Techie2000 Posted October 3, 2017 Posted October 3, 2017 Hi, one of the schools which I have just taken over has Lexmark MFDs and have just invested in PaperCut. The printer supplier is looking at almost £150 per RFID reader - has anyone managed to get the cheap Amazon/ eBay readers to work?
MatthewL Posted October 3, 2017 Posted October 3, 2017 In theory any reader will work but £150 doesn't sound unreasonable. I used RDIdeas RDR80581 which is a mutlipurpose reader and has various profiles which can be set. These are by far the best readers I have found out there. 1
MicrodigitUK Posted October 3, 2017 Posted October 3, 2017 (edited) Problem is Lexmark's only support a small number of USB IDs one we have on our Lexmark's are RFIdeas ones. And they are about £150. You could go direct to http://www.windmill-computing.co.uk and save a few quid. I got some cheep Chinese ones off of eBay for £5, but the USB IDs were not compatible with Lexmark. Had to re-wright the firmware to emulate RFIdeas USB ID to make cheep ones work. Not a task for the faint hearted as effectively had to reverse engineer the working card readers and flash all my cheap Chinese ones. How many do you need? I could source some and flash the firmware for you, to make them Lexmark compatible. £50 each?? Edited October 3, 2017 by MicrodigitUK 1
Techie2000 Posted October 4, 2017 Author Posted October 4, 2017 Problem is Lexmark's only support a small number of USB IDs one we have on our Lexmark's are RFIdeas ones. And they are about £150. You could go direct to RF ID reader and card printer systems for membership and loyalty cards - Windmill Computing and save a few quid. I got some cheep Chinese ones off of eBay for £5, but the USB IDs were not compatible with Lexmark. Had to re-wright the firmware to emulate RFIdeas USB ID to make cheep ones work. Not a task for the faint hearted as effectively had to reverse engineer the working card readers and flash all my cheap Chinese ones. How many do you need? I could source some and flash the firmware for you, to make them Lexmark compatible. £50 each?? Thanks for this, I'll get back to you. I believe we're getting some on trial from the printer company (probably until the SBM finds out how much they're charging for them!!).
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now