Toshiba TDP-SB20 projetors Reset lump time

[GCedu]

After you have replaced the lamp with an new one; do the following.

Make sure the projector has power and turn it "ON"

Press the "menu" button on the remote

Go to the "To default setting 1 menu" and press the "enter" key on the remote

Scroll down until you see "Beep" and turn beep on ( You should hear the beep when it is turn "on")

Turn off the projector by pressing twice the power button on the remote ( you will hear two beeps)

Point the remote to the projector and press and hold down the up key until you hear a beep. Then press the down key until you hear two beeps and that should do it.

 

Have a happy projecting!

 

John

Edited November 18, 2016 by GCedu
misspelling