Windows Server 2012 RRAS Problem

[jguevarra]

i create windows server domain dhcp is working and dns

 

my lan is

192.168.1.6

255.255.255.0

192.168.1.5

 

DNS 192.168.1.5

 

client receive IP Address from server but the problem is no internet i install RRAS but still not working

can you help me about this problem i use VPN and NAT for RRAS

[fredbayker]

Do you have two NICs? One on the external subnet and the other on the internal.

[jguevarra]

yes i have 2 nics 1 for internet and the other 1 for lan

 

my configuration on lan is

IP=192.168.1.6

SM=255.255.255.0

DG=192.168.1.5

 

DNS=192.168.1.6

 

my External Internet From Provide is

182.17.255.178

255.255.0.0

182.17.255..169

 

8.8.8.8

8.8.4.4

 

please help this almost killing me -_-

DHCP is working DNS Working AD is working

only no Internet is my problem i already install Remote Access (Routing Remote Access)

Edited May 16, 2016 by jguevarra

[jguevarra]

This my LAN Configuration and Client IP Receive from DHCP Server

there is a wrong cconfiguration on this why i dont have an internet access in client?

 

[Homer]

What is 192.168.1.5?

[jguevarra]

actually i already remove that ip sir Homer

i fix the problem sir internet in client is now workin

 

my 2nd Question is i want 2 ISP internet Connection in case the one ISP goes down and 2nd one is up

[Homer]

Then I suggest you get an old box with a few NIC cards in it, install smoothwall express or pfsense etc and configure that as your gateway. It will handle failover a lot better than your current setup.

[jguevarra]

ok thank you master