Meraki can't add a profile

[Sheridan]

I'm trying to get Meraki working with some ipads, so I created a basic profile (wifi) to setup the ipads and get them online. Nothing else is in this profile

 

The ipads connect through the wireless fine, and then I go to meraki to pull down the management profile - again this works fine and the Apps start to install. But it will not install any of the profiles/restrictions and meraki logs an error:

 

   Code: 4001
   Domain: MCInstallationErrorDomain
   Profile Installation Failed
   Code: 4017
   Domain: MCInstallationErrorDomain
   Remove the profile “Profile Name” before installing this profile.

 

Am I missing something here - if I remove the Profile, the ipad lose its connection and therefor meraki loses it, with it on and connected meraki is telling me to remove it!?

[Sheridan]

I don't know if anyone else has seen this problem, but if I apply a profile with no restrictions via Meraki then it works - add the restrictions (which is half the point) and it fails applying the profile

[Sheridan]

Its must be a firewall issue here - if I hotspot to a phone it works ok - but if I check our firewall I can't see anything being blocked

 

I've setup the firewall rules according the cisco's instructions - has anyone else done this, and what ports/addresses did you have to open?

[mikkydoos]

Whitelist the cisco.com domain.