McGeek Posted September 5, 2013 Posted September 5, 2013 Two Cisco 4506's are up for grabs. They are populated with multiple fibre modules and 1Gb ethernet. Priority goes to any school that can put them to use but you will need to pick them up and they are heavy! Collection would be from Milton Keynes.
FN-GM Posted September 5, 2013 Posted September 5, 2013 Do these run IOS? How many Ethernet ports does it have? Thanks
McGeek Posted September 5, 2013 Author Posted September 5, 2013 As far as I know, they just run the standard Cisco stuff. Pic is attached.
FN-GM Posted September 5, 2013 Posted September 5, 2013 Some of the older ones run CATos and the newer ones running IOS. I know someone who is looking to upgrade. But there are not enough Ethernet ports for them Thanks for the time
twin--turbo Posted September 5, 2013 Posted September 5, 2013 Could you tell me what supervisors are in them, I may well be able to put them to good use. Rob
McGeek Posted September 5, 2013 Author Posted September 5, 2013 I'm afraid I can't without firing them up and interrogating them. They were last used two years ago and the config has passed from my NM's memory (and never was in mine).
twin--turbo Posted September 5, 2013 Posted September 5, 2013 it should be in the top left hand corner of the supervisor module starts WS-X45.. Cheerrs Rob
twin--turbo Posted September 5, 2013 Posted September 5, 2013 Thanks Not Ideal but will do the job. Any chance you could pop on a pallet as it's a bit of a treck in the car. Rob
McGeek Posted September 5, 2013 Author Posted September 5, 2013 If you arrange a courier to pick it up we could do that. Do you want both units?
twin--turbo Posted September 5, 2013 Posted September 5, 2013 (edited) Yeah both would be super for our application. If it could be a half pallet 100x120x90cm and max 600kg (not going to get anywhere near that weight!) that would be gr8. and I can get it collected. (it's just a standard pallet btw, just half height so 90cm not 180.. Not an issue i expect Rob Edited September 5, 2013 by twin--turbo
McGeek Posted September 5, 2013 Author Posted September 5, 2013 Ok. PM me and we will sort out the details.
PotNoodleTech Posted September 9, 2013 Posted September 9, 2013 Are these taken? If not can I take them? Many Thanks.
twin--turbo Posted September 9, 2013 Posted September 9, 2013 Hopefully on a pallet heading my direction if the pallet company got there! Rob
McGeek Posted September 9, 2013 Author Posted September 9, 2013 @AButters - They have been bagged by Twin--Turbo. @twin--turbo, Will check if they have been collected tomorrow.
featured_spectre Posted September 9, 2013 Posted September 9, 2013 Damn if I saw this sooner I could have collected today! I was in MK earlier!
PotNoodleTech Posted September 12, 2013 Posted September 12, 2013 (edited) Darn you twin turbo you were too fast for me! Edited September 12, 2013 by PotNoodleTech
twin--turbo Posted September 12, 2013 Posted September 12, 2013 Hopefully arrive today or tomorrow....
twin--turbo Posted September 13, 2013 Posted September 13, 2013 forgot to say they arrived safe and sound on thursday. Not got them fired up yet, I was expecting to need C19 plugs for the PSU's but as they are 1000w they use 13A inlets, but for some reason cisco decided to use C15 Hot plugs rather than C13's I could not find a single Hot IEC lead so have orderd up some remakeable ends on ebay. Thanks again for your help in moving them on Rob
twin--turbo Posted September 24, 2013 Posted September 24, 2013 Got them fired up yesterday and the config cleared down All good thanks Rob
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now