hello every one

I want to connect my KONICA MINOLTA 7555 photocopier on a network. The situation is, i have four PC's that are networked through a 8 port switch. I connected my photocopier to one port of switch and i enabled DHCP on a photocopier. the switch automatically assign a IP address to a photocopier, the printout of photocopier TCP/ IP setting is

 

TCP/IP Setup == ON

Subnet mask == 255.255.255.0

Enabled DHCP == ON

Other DNS Server == 202.163.96.4

IP Address == 192.168.1.37

Default Gateway == 192.168.1.1

Preferred DNS Server == 202.163.96.3

RAW Port Number == 9100

 

I downloaded PCL_6 printer drivers for 7222 Photocopier on one PC of the network then i add photocopier as a printer through "ADD PRINTER WIZARD" I selected a new "STANDARD TCP/IP PORT" in the wizard.

Place IP address of the photocopier (192.168.1.37) and Port name (IP_192.168.1.37) then i selected "GENERIC NETWORK CARD" as device type then next then finish then i install PCL_6 printer drivers then next and then shared this printer on a network then a test page option said, "Do you want to print a test page?" i selected yes.

But i was very frustrated when saw "TEST PAGE FAILED TO PRINT"

 

one more point i also pinging the photocopier from one PC of that network, the pinging is successful but "TEST PAGE FAILED TO PRINT" can't imagine it.

 

Can any one help me in solving this problem??? Any help will be very appriciated.