opiesbro

Thank you for the response. I'm not sure why the script did not copy and paste properly but below you will see the one that is currently in the router. Also it will not ping the internet from inside the router. I have tested it both thru the CLI console connection and with a laptop connected directly to the G0/0 port. Along with this I have a 3750G with wireless controller that will be part of my network. Another thing that I am not sure about is all of the scripts I see on forums about this have a dialer and also do not have the E0/0/0 ports shown. This E0/0/0 is a virtual port I believe that creates when the ATM is in use. However when you do a "ip int brief" it is almost never "UP" or the protocol is almost never "UP" either. Thanks, Router#show run Building configuration... Current configuration : 2088 bytes ! ! Last configuration change at 20:28:03 CST Wed Mar 8 2017 ! version 15.1 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! ! enable secret enable password ! no aaa new-model clock timezone CST -6 0 ! no ipv6 cef ip source-route ip cef ! ! ! ! ! no ip domain lookup multilink bundle-name authenticated ! vpdn enable ! vpdn-group pppoe ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO1941/K9 sn FTX1849812J ! ! ! ! controller VDSL 0/0/0 ! ! ! ! ! interface GigabitEthernet0/0 description S1 Path 1 ip address 192.168.1.252 255.255.255.224 ip nat inside ip virtual-reassembly in duplex auto speed auto ! interface GigabitEthernet0/1 description S1 Path 2 no ip address duplex auto speed auto ! interface ATM0/0/0 ip address 65.255.159.139 255.255.255.128 ip nat outside ip virtual-reassembly in no atm ilmi-keepalive ! interface Ethernet0/0/0 no ip address no fair-queue ! ip default-gateway 65.255.159.129 ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 1 interface ATM0/0/0 overload ip route 0.0.0.0 0.0.0.0 65.255.159.129 ip route 0.0.0.0 0.0.0.0 ATM0/0/0 65.255.159.129 ! access-list 1 remark ALLOWS_ALL_INTERNAL_IPS_OUT access-list 1 permit 192.168.1.0 0.0.0.31 ! ! ! control-plane ! ! banner motd ^C -------------------------------------------------------------- XXXXXXX -------------------------------------------------------------- ^C ! line con 0 password logging synchronous login line aux 0 password login line vty 0 4 password login transport input all ! scheduler allocate 20000 1000 end

I have purchased a Cisco 1941 with an Ehwic adsl2 card that I am trying to set up to work with my ISP. Unfortunately my ISP does not deal with commercial gear with DSL normally so we are having issues. Now it's time to ask the pros as I am just learning about this technology. Attached is my script if anyone can help or tell me why I can sync to the DSLAM but not get to the internet. Thanks, Router#sho run Building configuration... Current configuration : 1807 bytes ! version 15.1 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! ! enable secret enable password ! no aaa new-model clock timezone CST -6 0 ! no ipv6 cef ip source-route ip cef ! ! ! ! ! no ip domain lookup multilink bundle-name authenticated ! vpdn enable ! vpdn-group pppoe ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO1941/K9 sn FTX1849812J ! ! ! ! controller VDSL 0/0/0 ! ! ! ! ! interface GigabitEthernet0/0 description S1 Path 1 ip address 192.168.1.252 255.255.255.224 duplex auto speed auto ! interface GigabitEthernet0/1 description S1 Path 2 no ip address duplex auto speed auto ! interface ATM0/0/0 ip address 65.255.159.139 255.255.255.128 no atm ilmi-keepalive ! interface Ethernet0/0/0 ip address 192.168.1.1 255.255.255.224 ! ip default-gateway 65.255.159.129 ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 65.255.159.129 ip route 0.0.0.0 0.0.0.0 ATM0/0/0 65.255.159.129 ! ! ! ! control-plane ! ! banner motd ^C -------------------------------------------------------------- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX -------------------------------------------------------------- ^C ! line con 0 password logging synchronous login line aux 0 password login line vty 0 4 password login transport input all ! scheduler allocate 20000 1000 end