vote-for-pedro

Well if I sponsored an Educational IT Technical help forum I would try and keep an eye on it. And as you know in these types of forums its often a lot easier to get a simple solution in an easy to read way.

Yep this is working with MC1550 v8-5 and AP332i Configuration > timer create profile for on/off time > associate the timer profile to the ESS profile. Check your controller clock as it might be wrong. Cli type 'DATE' to see time type 'calendar set MM/DD/YYYY HH:MM:SS' not sure why this is sponsored by Meru when they don't view the forum and also now its Fortinet..

QUESTION: Not enough space to extract tar file 'meru-x.x-xxx-MCxxxx-rpm.tar'. ANSWER : This issue is seen when there is not enough space on the controller to upload a code on it. This could happen when the controller has multiple software code in it or unwanted files in it or the memory space of the controller is not big enough to hold the code in its flash. To fix this issue, you need to free up space on the controller. Check the flash for existing code and delete the unused codes. To accomplish this task, you can use the commands show flash. Once you have found the codes that needs to be deleted, use the command delete flash: code . At times it might require to delete the code of the current software running on the controller but it is Ok to do that. You can check the available space on the controller by performing the command show file systems and the available space should be greater than 50% and used space should be lesser than 50%. Once you can confirm this, the code should get uploaded fine

Nothing happens when I try and delete the old system files. no error just doesn't delete the files. I have rebooted the controller. I did Successfully deleted the Meru gather files but it doesn't appear to have made any more space, still getting "need 298mb extra free but only have 188mb" error. Dir now looks like -rwxr-xr-x 1 root root 114550 Jan 27 2015 config-factory.tgz -rw-rw-rw- 1 root root 57 May 8 2014 lastdiag drwxr-xr-x 8 root root 1024 Sep 1 2012 meru-5.3-41 drwxr-xr-x 8 root root 1024 Jan 15 2013 meru-5.3-50 drwxr-xr-x 9 root root 1024 Jan 27 2015 meru-6.1-3-5 lrwxrwxrwx 1 root root 29 Jan 27 2015 mibs.tar.gz -> meru-6.1-3-5/mibs/mibs.tar.gz -rw-r--r-- 1 root root 44723 Jan 27 2015 pre-upgrade-config -rw-r--r-- 1 root root 46420 Nov 23 16:41 script.log -rw-r--r-- 1 root root 18308 Mar 16 2015 startup-config -rw-r--r-- 1 root root 44576 Jan 27 2015 tftp -rw------- 1 root root 0 Nov 23 12:44 upgrade.log

Hi All I'm updating my MC1550 controller to v7 from v6.1 but coming up against "Not enough space to extract tar" file in the CLI window. The contents of the directory is below.. Can I delete some of these files? namely the meru gather files. -rwxr-xr-x 1 root root 114550 Jan 27 2015 config-factory.tgz -rw-rw-rw- 1 root root 57 May 8 2014 lastdiag drwxr-xr-x 8 root root 1024 Sep 1 2012 meru-5.3-41 drwxr-xr-x 8 root root 1024 Jan 15 2013 meru-5.3-50 drwxr-xr-x 9 root root 1024 Jan 27 2015 meru-6.1-3-5 -rw-rw-rw- 1 root root 1080934 Apr 22 2014 meru.gather.WBS-WLC-01.2014-04-22.09-28-53.tar.gz -rw-rw-rw- 1 root root 1076577 Apr 22 2014 meru.gather.WBS-WLC-01.2014-04-22.09-32-11.tar.gz -rw-rw-rw- 1 root root 1223148 Apr 22 2014 meru.gather.WBS-WLC-01.2014-04-22.09-34-52.tar.gz -rw-rw-rw- 1 root root 1081363 Apr 22 2014 meru.gather.WBS-WLC-01.2014-04-22.09-38-48.tar.gz -rw-rw-rw- 1 root root 1251783 May 8 2014 meru.gather.WBS-WLC-01.2014-05-08.16-38-35.tar.gz lrwxrwxrwx 1 root root 29 Jan 27 2015 mibs.tar.gz -> meru-6.1-3-5/mibs/mibs.tar.gz -rw-r--r-- 1 root root 44723 Jan 27 2015 pre-upgrade-config -rw-r--r-- 1 root root 46420 Nov 23 14:17 script.log -rw-r--r-- 1 root root 18308 Mar 16 2015 startup-config -rw-r--r-- 1 root root 44576 Jan 27 2015 tftp -rw------- 1 root root 0 Nov 23 12:44 upgrade.log Cheers

Hi anyone know I can set the Meru MC1550 to disable the wifi at certain times of the day? Thanks

http://www.edugeek.net/forums/home-access-plus/141219-hap-something-wrong-errors-login-when-accessing-my-files.html Hi I think i'm having the same issue as the above link. Would anyone be able to offer some advice on correcting "the default domain controller policy was imposing Local login rights so the GPO applied to my Web Server OU wasn't adding the correct user group" Thank for your help.

Alas they are the correct versions. Backup of database been sent to capita for them to have a look at. Will let you know.

Did you have any success in fixing this? I have a similar Duplicate primary key issue There was an error transferring the data between the SIMS and Discover databases! at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlBulkCopy.RunParser(BulkCopySimpleResultSet bulkCopyHandler) at System.Data.SqlClient.SqlBulkCopy.CopyBatchesAsyncContinuedOnSuccess(BulkCopySimpleResultSet internalResults, String updateBulkCommandText, CancellationToken cts, TaskCompletionSource`1 source) at System.Data.SqlClient.SqlBulkCopy.CopyBatchesAsyncContinued(BulkCopySimpleResultSet internalResults, String updateBulkCommandText, CancellationToken cts, TaskCompletionSource`1 source) at System.Data.SqlClient.SqlBulkCopy.CopyBatchesAsync(BulkCopySimpleResultSet internalResults, String updateBulkCommandText, CancellationToken cts, TaskCompletionSource`1 source) at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternalRestContinuedAsync(BulkCopySimpleResultSet internalResults, CancellationToken cts, TaskCompletionSource`1 source) at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternalRestAsync(CancellationToken cts, TaskCompletionSource`1 source) at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternalAsync(CancellationToken ctoken) at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServerAsync(Int32 columnCount, CancellationToken ctoken) at System.Data.SqlClient.SqlBulkCopy.WriteToServer(IDataReader reader) at Discover.Warehouse.TransferAgent.Transferor.ExecuteDiscoverBulkCopy(Int32 partitionID, IList`1 discoverTables, IDataReader simsDataReader, IDbConnection discoverConnection, IDbTransaction discoverTransaction, List`1 metrics) at Discover.Warehouse.TransferAgent.Transferor.ExecuteSimsLoad(ITransferConfiguration transferConfig, IDbTransaction discoverTransaction, IDbConnection discoverConnection, IDbConnection simsConnection, List`1 metrics) at Discover.Warehouse.TransferAgent.Transferor.GetStudentData(Int32 partitionID, Int32 partitionOrder, IDbConnection simsConnection, IDbConnection discoverConnection, ITransferConfiguration transferConfig, List`1 metrics, Int32 allowGenerate) at Discover.Warehouse.TransferAgent.Transferor.TryExecute(Int32 partitionID, Int32 partitionOrder, DateTime partitionTime, Int32 allowGenerate) Unable to transfer data between SIMS and Discover after 5 attempt(s) - waiting for next request!

best method I have found is open an itunes account with a voucher card use an email such as [email protected] buy an app or 2 then log in to each ipad and go to app store purchased apps page and download the app on each ipad teachers can put there own apps on if they like using there own accounts. Yes, you can download the app onto as many devices as you want. The app store on the ipad lets you sign in and out with what ever account you want and then download apps that were purchased with that account for free. You can also use that same itunes library on a computer to sync everything over to as many devices as you want. now on the ipods/iphones/ipads the limitation that exists is the number of itunes accounts. Lets say your family has 4 itunes accounts. One for each parent and two children also have their own accounts. You would be able to download apps for free that have been purchesed on any of these accounts. However each device can only have apps and music from a limit of 5 accounts. So if your family has 5 accounts your still good and can load everything for free. If for some reason there are more than 5 account you will have to pick the 5 that you want to be able to use and stuff from the 6th(and up) account cant be used. This is really great for those expensive apps like GPS turn my turn direction apps. Navigon North America is $79, I purchased it all the time to route around traffic. I'm also able to download it onto my family members devices for free just by signing into my itunes account and downloading it from the app store on the device.

Hi did you ever solve this I have a c360 and all i can find to add the AD credentials to Konicas driver for account/auth settings is papercut MF or konica own software. Essentially i want it something to do this for freeee

YES! in your connect.in use Connectiontype-TrustedAuto This will suppress the intial login screen and solong as youve set the users with AD credential in system manager this should work.

Hi All Right i've just got a load of loverly Lenovo's for our office, of course capita in their wisdom don't support new technology until its too late (im talking 64bit OS here) If I use FMS on a 64bit Win 7 and I use BDE express for vista so the borland error goes away what problem am I going to face? Capita wont support me but will I lose data using this method, it all seems to be working great and I really dont want to downgrade to 32bit windows. Has anyone else made FMS work on a 64bit win 7 setup. Please give me your thoughts. TA

Hello all our school has aquired a new site to work from. I've gotten EMBC/Synetrix to join both of our site together via embc network. so now I have our exchange server on one site and our teachers on another. We use OWA but its not ideal, the site with the exchange server can of course use outlook but the second site I cant get it to connect, or atleast its extreamly slow, too slow for use. I can access the Exchange server using \\UNC or a \\ip address in a UNC style and it seems pretty quick. Why is exchange so slow?

I still cant seem to find a script to do this ? Anyone?