c4m3la

Hi I know this thread is old just adding my current status with these. We have 10 of these we installed ourselves. Not an easy task there can be nothing in the way of the light curtain (screws, metal strips, etc) Initial alignment can take up to 45 minutes. With Smartnotebook 15.1 and 15.2 they have removed the floating tools bar and replaced with the dynamic pen. I have sent emails back and forth with SmartTech about the issue of dynamic pen not selecting anything other than pen with the 15.1 and above software. So basically you can write but nothing else; erase forget about it etc. If you have Smartnotebook open and selected on a tool say eraser - minimize notebook, and you try to annotate on a web page or anything, it will stay on the last tool selected in smartnotebook in this case eraser. SmartTech has said that in order for dynamic toolbar to work with the 60wi's notebook has to be closed and then you can use the dynamic pen(which doesn't work either like I said earlier) Their support keeps telling me to reinstall and there's where they stop. I have sent videos of the issue. They can't fix it. We are stuck on Smartnotebook 15 with floating toolbar still and we pay for an enterprise license...BTW they have just discontinued the smart interactive projectors(stated by my Smarttech rep Dec2015). I know Epson makes an interactive projector that is compatible with smartnotebook but similar issues and harder to install yourself. Interactive Displays are the way to go now. And I have found that Infocus Jtouch display might work with smartnotebook but need to demo it to be sure.

Hi Ryan, Did you ever get the thin clients, or fat to thin pcs to work with smartboards? We have n500 ncomputing thin clients with Citrix viab and no luck here. Now we are getting the newer interactive smart projectors. Any Help Thanks,