itdud55

we distribute our software using msi through group policy it has stopped working have checked all services have started can some one help thanks

thanks will have a another go at it

IP Route Entries Destination Gateway VLAN Type Sub-Type Metric Dist. ------------------ --------------- ---- --------- ---------- ---------- ----- 0.0.0.0/0 10.10.40.1 1 static 250 1 10.10.40.0/21 DEFAULT_VLAN 1 connected 1 0 127.0.0.0/8 reject static 0 0 127.0.0.1/32 lo0 connected 1 0 172.16.0.0/21 DEFAULT_VLAN 1 connected 1 0

yes vlan is setup have run sh conf hostname "ServerRoom-SW-1" time timezone 60 time daylight-time-rule Western-Europe module 1 type J9147A module 2 type J9008A interface A1 name "10Gb-uplink-to-Core" exit ip default-gateway 10.10.40.1 snmpv3 enable snmpv3 restricted-access snmpv3 group ManagerPriv user "NetworkMgr" sec-model ver3 vlan 1 name "DEFAULT_VLAN" untagged 1-28,33-48,A1-A2 ip address 172.16.0.22 255.255.248.0 ip address 10.10.40.22 255.255.248.0 no untagged 29-32

hi all I have set up a new dchp scope to use with a vlan for our cctv we have a hp procurve switch I have set the ports to be used for the cctv and untagged them. I need to know how to get the vlan to get the ip address from the new scope I have setup I am using putty ssh to make changes to switch can any body help