Hi guys
I am trying to learn the HP Procurve product for a coming implementation, and have a test lab comprising two Procurve 2920 24G switches to play with. I am trying to set up these two switches with vlan's, and am trying to test the intervlan routing on them. These two switches are not connected to any existing internal or external network, since I'm working on a customer site, I don't have that option. So therefore they are just two stand alone swithes to start with.
I'm trying to see if I can create a few vlan's, with different ip adressing on each, and connect a labtop to the different vlan's, and then from one vlan ping the other vlan's , to test that routing between the vlan's are working. And would like to test the access list feature once I get the vlan routing to work.
I found a guide of how to set up the routing for a Procurve 5300XL, which outline the following;
CONFIGURATION COMMANDS: (created on software version E.06.01):
HP ProCurve Switch 5304XL# enable
HP ProCurve Switch 5304XL# config term
HP ProCurve Switch 5304XL(config)# ip routing
HP ProCurve Switch 5304XL(config)# router rip
HP ProCurve Switch 5304XL(rip)# vlan 100
HP ProCurve Switch 5304XL(vlan-100)# untag a1-a24
HP ProCurve Switch 5304XL(vlan-100)# tag b1
HP ProCurve Switch 5304XL(vlan-100)# ip address 10.10.100.1/24
HP ProCurve Switch 5304XL(vlan-100)# ip rip v2-only
HP ProCurve Switch 5304XL(vlan-100)# vlan 200
HP ProCurve Switch 5304XL(vlan-200)# untag c1-c24
HP ProCurve Switch 5304XL(vlan-200)# tag b1
HP ProCurve Switch 5304XL(vlan-200)# ip address 10.10.200.1/24
HP ProCurve Switch 5304XL(vlan-200)# ip rip v2-only
HP ProCurve Switch 5304XL(vlan-200)# write mem
I have used that guide as a framework to try and implement the intervlan routing on the 2920 24G switches, and below is the configuration I have on the switch right now.
SwitchA(vlan-20)# sh run
Running configuration:
; J9726A Configuration Editor; Created on release #WB.15.11.0007
; Ver #03:12.15.0d:09
hostname "SwitchA"
module 1 type j9726a
trunk 23-24 trk1 lacp
ip routing
snmp-server community "public" unrestricted
oobm
ip address dhcp-bootp
exit
router rip
redistribute connected
exit
vlan 1
name "DEFAULT_VLAN"
no untagged 1-14,Trk1
untagged 15-22,A1-A2,B1-B2
no ip address
exit
vlan 10
name "MANAGEMENT"
untagged 1-4
tagged Trk1
ip address 192.168.1.1 255.255.255.0
ip rip 192.168.1.1
exit
vlan 20
name "SERVERS"
untagged 5-9
tagged Trk1
ip address 10.1.1.1 255.255.255.0
ip rip 10.1.1.1
exit
vlan 30
name "USERS"
untagged 10-14
tagged Trk1
ip address 10.1.2.1 255.255.255.0
ip rip 10.1.2.1
exit
vlan 40
name "SWITCH-LINK"
tagged Trk1
ip address 172.16.1.1 255.255.255.0
ip rip 172.16.1.1
exit
spanning-tree Trk1 priority 4
no autorun
no dhcp config-file-update
no dhcp image-file-update
password manager
password operator
If I connect to a vlan port let's say vlan 10, with my laptop, and give my labtop a static IP address of 192.168.1.5, I can only ping 192.168.1.1 but none of the other IP adresses like for example 10.1.1.1 on vlan 20. What am I doing wrong, and shouldn't I be able to ping the other vlan's when the routing has been set up.
Any help would be appreciated.
virt-net
