grabern

I have a route setup on the core switch but it doesn't seem to be working... ip route 0.0.0.0 0.0.0.0 192.168.68.254 ip route 192.168.0.0 255.255.252.0 192.168.0.1 The vlan (vlan 423) has a static IP of 192.168.0.72 255 255 252.0 If I statically assign an IP to a device and untag the port for the 423 vlan, I can ping 192.168.0.72 from that device. However, I cannot ping any other device on that vlan that resides on the other firewall interface (0/1). So I still can't communicate with 192.168.0.3... Does that make sense?

I'm not sure... Does the route need to be setup on the core switch? Or on the Juniper? The commands you suggested do not work on the HP switches... Thoughts? Thanks! Nathan

I have 3 interfaces on a Juniper SSG-320M. 0/0 for the WAN 0/1 for 192.168.0.1/22 0/2 for 192.168.68.254/24 0/1 has an HP 4108gl as it's core switch. 192.168.0.3 is the DHCP/DNS server. 192.168.0.12 is the Windows Deployment Server (WDS). 0/2 has an HP 4104gl as it's core switch. 192.168.68.5 is the DHCP/DNS server. I want clients on the 0/2 network to use the WDS server on the 0/1 network to image computers (pxe). Is there any way to make this happen? I can post in different category if that would be better. Thanks in advance! Nathan