aruntechie123

It turned out to be a switch port configuration issue. The network team mentioned that the WDS server was connected to a 'User' port instead of a 'server' port. (Whatever that means !!) That solved it.

Hello All, Please try to help me with the following. Thanks. ISSUE: In a specific Adsite PC’s are unable to PXE-boot from the network after pressing F12. It appears to contact DHCP, and finally fails 10 minutes later with : “PXE:E55 ProxyDHCP service did not reply to request on Port 4011” SYSTEMS INVOLVED: SCCM 2007 R3 PC : Virtual PC on an XP PC WDS : Server 2008 R2 VLAN : Only 1 subnet HP Switches NOTES: * PC, WDS, DHCP in same subnet but seperate systems * WDS not configured (as recommended) * No options configured on DHCP (eg.60, 67 etc.) * HP Switches * Same error also on Physical PC's * I have done all expected troubleshooting steps like restart server, re-install WDS, PXE, x86/x64 Boot packges replicated on PXE and DP * The Network team reports no issues. If this is indeed a network issue, how can I convince them? LOGS ETC. ------------ (a) Wireshark Details * Captured for about 30 seconds after F12 * Labels - 10.1.1.1 Gateway - 10.1.1.2 DHCP - 10.1.1.3 WDS - 10.1.1.4 VirtualPC (running on an XP PC in same subnet) Client Captures : ----------------- * Wireshark active on XP PC on which the VirtualPC is to be imaged * Capture Filter = "ether host or host 255.255.255.255" No. Time Source Sport Destination DPort Protocol Info 1 0 0.0.0.0 68 255.255.255.255 67 DHCP DHCP Discover - Transaction ID 0xd7f746 2 0.021991 10.1.1.2 67 255.255.255.255 68 DHCP DHCP Offer - Transaction ID 0xd7f746 3 0.033015 10.1.1.1 67 255.255.255.255 68 DHCP DHCP Offer - Transaction ID 0xd7f746 4 0.03338 10.1.1.1 67 255.255.255.255 68 DHCP DHCP Offer - Transaction ID 0xd7f746 5 4.020094 0.0.0.0 68 255.255.255.255 67 DHCP DHCP Request - Transaction ID 0xd7f746 6 4.033852 10.1.1.2 67 255.255.255.255 68 DHCP DHCP ACK - Transaction ID 0xd7f746 7 4.034699 Microsof_a1:b2:c3 Broadcast ARP Who has 10.1.1.3? Tell 10.1.1.4 8 4.04192 10.1.1.1 67 255.255.255.255 68 DHCP DHCP ACK - Transaction ID 0xd7f746 9 4.055626 xxxxxx_d1:e2:f3 Microsof_a1:b2:c3 ARP 10.1.1.3 is at xx:xx:xx:d1:e2:f3 10 4.055976 10.1.1.4 68 10.1.1.3 4011 DHCP DHCP Request - Transaction ID 0xd7f746 11 4.074769 Microsof_a1:b2:c3 xxxxxx_d1:f2:f3 ARP 10.1.1.4 is at Microsof_a1:b2:c3 12 8.038492 10.1.1.4 68 0.0.0.0 4011 DHCP DHCP Request - Transaction ID 0xd7f746 13 12.101602 10.1.1.4 68 10.1.1.3 67 DHCP DHCP Release - Transaction ID 0xd7f746 14 12.101927 0.0.0.0 68 255.255.255.255 67 DHCP DHCP Request - Transaction ID 0xd7f746 15 12.153739 10.1.1.2 67 255.255.255.255 68 DHCP DHCP ACK - Transaction ID 0xd7f746 16 12.162067 10.1.1.1 67 255.255.255.255 68 DHCP DHCP ACK - Transaction ID 0xd7f746 17 12.358486 10.1.1.4 68 0.0.0.0 4011 DHCP DHCP Request - Transaction ID 0xd7f746 18 16.224459 10.1.1.4 68 0.0.0.0 4011 DHCP DHCP Request - Transaction ID 0xd7f746 19 20.232096 10.1.1.4 68 10.1.1.3 67 DHCP DHCP Release - Transaction ID 0xd7f746 20 20.232445 0.0.0.0 68 255.255.255.255 67 DHCP DHCP Discover - Transaction ID 0x1d7f746 21 20.263569 10.1.1.2 67 255.255.255.255 68 DHCP DHCP Offer - Transaction ID 0x1d7f746 22 20.272424 10.1.1.1 67 255.255.255.255 68 DHCP DHCP Offer - Transaction ID 0x1d7f746 23 20.272784 10.1.1.1 67 255.255.255.255 68 DHCP DHCP Offer - Transaction ID 0x1d7f746 24 28.253207 0.0.0.0 68 255.255.255.255 67 DHCP DHCP Request - Transaction ID 0x1d7f746 25 28.286415 10.1.1.2 67 255.255.255.255 68 DHCP DHCP ACK - Transaction ID 0x1d7f746 26 28.286581 10.1.1.4 68 10.1.1.3 4011 DHCP DHCP Request - Transaction ID 0x1d7f746 27 28.286819 10.1.1.1 67 255.255.255.255 68 DHCP DHCP ACK - Transaction ID 0x1d7f746 WDS Server Captures : --------------------- * Capture filer = "port 67 or port 68 or port 69 or port 4011" * packet 8 below mentions error in Wireshark : header checksum incorrect : 0x0; should be ... (I hear this can be ignored) No. Time Source SPort Destination DPort Protocol Info 1 10.984442 10.1.1.1 67 10.1.1.3 67 DHCP DHCP Discover - Transaction ID 0xd7f746 2 10.986126 10.1.1.3 67 10.1.1.1 67 DHCP DHCP Offer - Transaction ID 0xd7f746 3 10.989614 10.1.1.1 67 255.255.255.255 68 DHCP DHCP Offer - Transaction ID 0xd7f746 4 10.99051 10.1.1.1 67 255.255.255.255 68 DHCP DHCP Offer - Transaction ID 0xd7f746 5 14.996137 10.1.1.1 67 10.1.1.3 67 DHCP DHCP Request - Transaction ID 0xd7f746 6 15.001967 10.1.1.1 67 255.255.255.255 68 DHCP DHCP ACK - Transaction ID 0xd7f746 7 15.034113 10.1.1.4 68 10.1.1.3 4011 DHCP DHCP Request - Transaction ID 0xd7f746 8 15.058217 10.1.1.3 4011 10.1.1.4 68 DHCP DHCP ACK - Transaction ID 0xd7f746 9 19.009247 10.1.1.4 68 0.0.0.0 4011 DHCP DHCP Request - Transaction ID 0xd7f746 10 23.109825 10.1.1.1 67 10.1.1.3 67 DHCP DHCP Request - Transaction ID 0xd7f746 11 23.121994 10.1.1.1 67 255.255.255.255 68 DHCP DHCP ACK - Transaction ID 0xd7f746 12 23.321528 10.1.1.4 68 0.0.0.0 4011 DHCP DHCP Request - Transaction ID 0xd7f746 13 27.18608 10.1.1.4 68 0.0.0.0 4011 DHCP DHCP Request - Transaction ID 0xd7f746 14 31.226225 10.1.1.1 67 10.1.1.3 67 DHCP DHCP Discover - Transaction ID 0x1d7f746 15 31.227854 10.1.1.3 67 10.1.1.1 67 DHCP DHCP Offer - Transaction ID 0x1d7f746 16 31.230974 10.1.1.1 67 255.255.255.255 68 DHCP DHCP Offer - Transaction ID 0x1d7f746 17 31.231868 10.1.1.1 67 255.255.255.255 68 DHCP DHCP Offer - Transaction ID 0x1d7f746 18 39.230293 10.1.1.1 67 10.1.1.3 67 DHCP DHCP Request - Transaction ID 0x1d7f746 19 39.234294 10.1.1.1 67 255.255.255.255 68 DHCP DHCP ACK - Transaction ID 0x1d7f746 20 39.248309 10.1.1.4 68 10.1.1.3 4011 DHCP DHCP Request - Transaction ID 0x1d7f746 21 39.249824 10.1.1.3 4011 10.1.1.4 68 DHCP DHCP ACK - Transaction ID 0x1d7f746 --------------------------- * From the above, it seems the UDP packet from WDS:4011 does not reach VirtualPC:68. After which the PC releases IP and the process loops. * smspxe.log when WDS tries to reply with wdsnbp.com from UDP-4011 to UDP-68 ============> DHCPREQUEST Reply to client ([010.001.001.004:68]) Len:339 smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) DHCP message: smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Operation : BootReply (2) smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Hardware Address type : 1 smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Hardware Address Length: 6 smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Hop Count : 0 smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Transaction ID : 46F7D704 smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Seconds Since Boot : 64 smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Client IP Address : 010.001.001.004 smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Your IP Address : 000.000.000.000 smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Server IP Address : 010.001.001.003 smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Relay Agent IP Address : 000.000.000.000 smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Hardware Address : xx:x:xx:a1:b2:c3: smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) BootFileName "smsboot\x86\wdsnbp.com" smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Magic Cookie: 64565733 smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Options: smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Type = 53 DHCP Message Type: 5=DHCPAck smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Type = 54 Server idenitifier: 010.001.001.003 smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Type = 97 UUID: xxxxx445ere87e68945678b8d2f4e12a4sdf smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Type = 60 ClassIdentifier: PXEClient smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) Type = 250 0201010504000007a903020014040200ba0626506c6561736520776169742e20534d53206973206c6f6f6b696e6720666f7220706f6c696379 smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) <============ DHCPREQUEST Reply (end) smspxe 3/16/2013 12:06:54 AM 7780 (0x1E64) [010.001.001.003:67] Recv From:[010.001.001.001:67] Len:348 1533af0 smspxe 3/16/2013 12:09:02 AM 8836 (0x2284) ============> Received from client: smspxe 3/16/2013 12:09:02 AM 8836 (0x2284) DHCP message: smspxe 3/16/2013 12:09:02 AM 8836 (0x2284) Operation : BootRequest (1) smspxe 3/16/2013 12:09:02 AM 8836 (0x2284) Hardware Address type : 1 smspxe 3/16/2013 12:09:02 AM 8836 (0x2284) (b) Test with PortQry.exe (v2) * portqry.exe -n 10.20.30.40 -e 68 -p udp -sp 4011 * I understand portqry sends a dummy packet to host (-n) at port (-e) from port(-sp) using protocol (-p) * 10.20.30.40 is a random PC in some other Adsite * Wireshark captures packets at 10.20.30.40; * no capture filter; display filter set to ip.addr == "WDS" or "RandomXP" or "randomServer" * portqry executed on : - WDS - 10.1.1.3 : No packets were received by 10.20.30.40 - a random XP PC in same subnet of WDS : No packets were received by 10.20.30.40 - a random server from ANOTHER Adsite : Packet received fine. * If I change the portqry.exe protocol from udp to tcp, then packet is received fine from all WDS/XP/Server above. Please let me know what further information is required. Thanks.