d-farah

thanks john, do you mean slot 2 in physical drive or logical, when i have checked the server, i can see that physical drive 0.0, 1.1, 2.2 and 3.3 but we only using now 0.0 and 1.1. i am really confusing here which drive got fault. need help!!!!!!!!!!!!!

Hi all, last few month MY DL360 HP Proliant server reported, there is disk issue but i could not identify the disk which has failure, the following log file show the disk summary and also the controller. The server has three disks two mirrored as 1 disk and other 1 is normail configuration i suppose array 5. all the lights are flashing green. could anyone help me how to identify and then replace the disk. many thanks dualeh Device Summary: Smart Array 6i in slot 0 Consolidated Error Report: Controller: Smart Array 6i in slot 0 Device: Physical Drive 2:2 Message: Predictive failure. Report for Smart Array 6i in slot 0 ----------------------------------- Smart Array 6i in slot 0 : Device Error Report Device Severity Error ------------------ -------- ------------------- Physical Drive 2:2 Warning Predictive failure. Smart Array 6i in slot 0 : Identify Controller Configured Logical Drives 2 (0x02) Configuration Signature 0xa00079bb RAM Firmware Revision 2.84 ROM Firmware Revision 2.84 Hardware Revision 0x01 Boot Block Revision 6.30 Drive Present Map Device Status ------------------ ------------- Physical Drive 2:0 Informational Physical Drive 2:1 Informational Physical Drive 2:2 Informational Physical Drive 2:4 Informational

Thanks John, I am going to have look and let you know if that is failure disk.

Hi John, Thanks for quick replay, no there is not red, all three drivers are green light flashing the front of drivers dualeh

Hi all, I have HP DL380 G4 proliant and a couple of weeks ago i had rebooted the server and i found the error message which says that (Replace disk immediately to avoid the loss) the server has three disks two mirrored as 1 disk and other configure standard also i have 1 spare hot swap disk but my problem is, how could identify the predictive failure disk on the server. when i run HP configuration utility it only shows that physical drive 2:2 failure but nothing else. I need help please...... can antone help this please. Many thanks Dualeh