Thanks for reading...
I've read the other posts and the instructions do not seem to apply. Here's what I have:
Generic Server with 2 on-board gig network adapters. I've added the Intel PCI Express 4-port NIC as well. So now I have 6 network adapters. I installed a fresh copy of Xenserver 5.6 (the free edition). It seems all 6 network cards. It allowed me to bond each pair of the 4-port Network card (0+1, and 2+3). The on board NICs are 4 & 5. I plan to use #4 as the Admin & LAN traffic card and 5 is intended for external traffic (for the firewalls).
I want to use one of the bonded card sets (Bond0) to point to one ISCSI storage array (10.0.10.0 subnet) and the other bonded card set (Bond1) to point to a separate ISCSI Storage Array (10.0.11.0 subnet). So the bonding occurred just fine but I can't give either of the bonds an IP address. It only allows me to give the management card an IP address. I tried creating an "External" connection using one of the bonds but it still does not allow me to assign an IP address.
So therefore, the ISCSI is not working. I'm able to use the management interface just fine so I know that its IP address is working ok. I'm not worried about having an IP address on the external connector (#5) because that's just for the firewalls.
I saw in another posting about right-clicking to "Manage" but I don't get "Manage" as an option, I get "Properties" but that does not allow me to assign an IP address.
HELP! Thanks!
