tazman

Ive looked around the outside of the servers and can't find any information. However RM's website tells the following information: echnical Definitions CPU and Chipset Intel® Xeon® Quad Core Processors (up to 2) Intel® Server Chipset 5500 Memory Up to 16GB DDR3 with ECC. Hard Drives Up to 8 x hot-swappable drives. 73GB/147GB/300GB SAS drives (15,000 rpm) or 500Gb (7,200rpm) SATA drives SCSI Controller and RAID compatibility LSI 8708EM2 RAID Controller Optional LSI 20320 SCSI Controller Network Interface Intel Pro/1000PT Network Connection (up to 2) Expansion Slots 4 x PCI Express (two of these are used by the SCSI and RAID controllers if selected) 1 x PCI card Optical Drive DVDRW Drive Input/ Output Ports 2 x Intel Gigabit Ethernet Connections 5 x USB (4 at back, 1 at front) 1 x VGA Tape Backup Drives Internal Hard Disk Drive Backup Internal LTO3 Tape drive (400GB Native/ 800GB with compression) Internal LTO4 Tape drive (800GB Native/ 1.6TB with compression) Maximum capacity assumes 2.6:1 data compression. Actual capacity may vary. Graphics 64MB DDR2 Onboard graphics Power Supply 650 Watt PSU (optional redundant) Temperature Range 5-35 degrees Centigrade operating Room Temperature 25 degrees Centigrade Humidity 20-80% operating Dimensions 5U (Rack or Pedestal) - One 'U' is equivalent to 1.76" Pedestal format - H420mm x W220mm x D650mm Rack format- H220mm x W420mm x D650mm Rack mount- Minimum rack length of 650mm and maximum of 1000mm RM Software RM Community Connect 3 and Community Connect 4 Licenses and software packs must be purchased separately Warranty 1 year Onsite next day A range of Server warranty upgrades are available I have 3 of these servers. LOL i presume the information in bold is what i need??

Hi I dont know much about battery backups and could do with some advice. My manager has assigned me the task of researching a new UPS battery backup for our three RM servers, LTO 4 superloader, RM Diskbox and one IBM server. Now Ive been on the APC website and tried to use the selector but it doesnt contain any RM servers and trying to fill in the details is difficult!! Currently we have one APC Smart-UPS 1000 connected to all four servers (not the superloader or RM diskbox). The load at the moment is 3/5. I know that the smart-ups 1000 on its own wont be capable so I just want to get a rough idea of what else to add or replace it with. Your help is much appreciated Thank you