RM Classboard - Not working.

[newpersn]

Got an RM Classboard in a classroom and its seems to have stop working. Pens are charged and there 2 lights lit up on the right hand side where the connections are. The computer its connected to picks the board up. But cant get it to work..

 

Any ideas?

[newpersn]

anyone im kinda stuck and teacher wont stop moaning about it. :/

[meastaugh1]

Hi,

Does the board beep when interwrite starts up? Is it connected via a serial cable? have you tried a different computer?

 

Are you saying that both green LEDs are on all the time? As far as I recall one should indicate power and the other contact between the board and pen. So if the latter is on all the time, it sounds like a short of some kind.

 

I think the box is attached to the board with a ribbon cable or two, should you want to try swapping it with one from a working board (at your own risk).

[newpersn]

Hi,

Does the board beep when interwrite starts up? Is it connected via a serial cable? have you tried a different computer?

 

Are you saying that both green LEDs are on all the time? As far as I recall one should indicate power and the other contact between the board and pen. So if the latter is on all the time, it sounds like a short of some kind.

It beeps 4 time when powered up and beeps once somene logs in to the computer. Its connected to a usb cable,

I think the box is attached to the board with a ribbon cable or two, should you want to try swapping it with one from a working board (at your own risk).

 

Dont really wanna try that, Im not that brave. Both lights are lit up on the side.

 

 

im updating the software on the computer for it now. Pens are charged up