zoohead Posted July 4, 2011 Posted July 4, 2011 I have been using SCCM for a few months and have no problems with standard pc and notebook builds but cannot say the same for netbooks. I am currently trying to install Windows 7 on a Toshiba NB500 using SCCM and have the following issue. The first stage runs smoothly, the netbook will pxe boot, run the task sequence, install the os, but when it reboots after the os install it sits at the command prompt with the following message: PXE Boot aborted. Booting to next device. I have tried changing the sata settings, tried a few different task sequences with variations on the build but everytime have the same result. Looking on other forums this error usually occurs if the device cannot pxe boot but that is not my problem. Any help or advice will be much appreciated. Ian
Gatt Posted July 4, 2011 Posted July 4, 2011 sounds like the mass storage driver for your HDD hasn't been installed... Hence, it's not finding the sata drive..
TheScarfedOne Posted July 4, 2011 Posted July 4, 2011 Beat me to that @Gatt! LOL. Yep - try integrating some mass storage device drivers into your boot.wim.
Zowlyfon Posted July 4, 2011 Posted July 4, 2011 http://www.edugeek.net/newreply.php?p=700575&noquote=1 This might help
Gatt Posted July 4, 2011 Posted July 4, 2011 http://www.edugeek.net/newreply.php?p=700575&noquote=1 This might help A blank reply box for this thread?
Zowlyfon Posted July 4, 2011 Posted July 4, 2011 Oops, Wrong link, PXE Boot Aborted. Booting to next device.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now