SCCM 2007 R3 OS deployment to netbooks

[zoohead]

I have been using SCCM for a few months and have no problems with standard pc and notebook builds but cannot say the same for netbooks. I am currently trying to install Windows 7 on a Toshiba NB500 using SCCM and have the following issue. The first stage runs smoothly, the netbook will pxe boot, run the task sequence, install the os, but when it reboots after the os install it sits at the command prompt with the following message: PXE Boot aborted. Booting to next device. I have tried changing the sata settings, tried a few different task sequences with variations on the build but everytime have the same result. Looking on other forums this error usually occurs if the device cannot pxe boot but that is not my problem.

 

Any help or advice will be much appreciated.

Ian

[Gatt]

sounds like the mass storage driver for your HDD hasn't been installed...

Hence, it's not finding the sata drive..

[TheScarfedOne]

Beat me to that @Gatt! LOL. Yep - try integrating some mass storage device drivers into your boot.wim.

[Zowlyfon]

http://www.edugeek.net/newreply.php?p=700575&noquote=1

 

This might help

[Gatt]

http://www.edugeek.net/newreply.php?p=700575&noquote=1

 

This might help

 

A blank reply box for this thread?

[Zowlyfon]

Oops, Wrong link, PXE Boot Aborted. Booting to next device.