HP Vlan Question

[jwc1972]

Hello All

 

I have been testing this for a while, I have a few questions. I have a hp Switch 2910 I have split this up into 4 Vlans. I added a mac address to windows server 2003 dchp of 192.168.1.220 of switch A and 192.168.1.221 Switch B. vlan 1 works. I have enable ip routing, do i need to add a route 0.0.0.0 0.0.0.0 (back to our gateway of 192.168.1.1? I get invaild input. How do i get Vlan 1 talking to vlan dmz

 

I get Show IP route entries

Dest - Gateway - vlan - type - subtype - metric - dist

127.0.0.0/8 reject statis 0 0

127.0.01.1/32 lo0 connected 1 0

172.16.8.0/25 dmz 100 connected 1 0

192.168.1.0/24 Test Vlan 1 connected 1 0

 

Switch A Config

Running configuration:

 

; J9147A Configuration Editor; Created on release #W.14.38

 

hostname "TestSwitchoffice"

module 1 type J9147A

mirror-port 1

ip routing

vlan 1

name "Test Lan"

untagged 1-12

ip address dhcp-bootp

tagged 48

no untagged 13-47

exit

vlan 100

name "DMZ"

untagged 37-47

ip address 172.16.8.1 255.255.255.128

tagged 48

exit

vlan 20

name "Voip"

untagged 13-24

ip address 192.168.42.1 255.255.255.0

exit

vlan 30

name "UP Lan"

untagged 25-36

ip address 10.22.30.1 255.255.255.0

exit

interface 40

monitor

exit

banner motd "This is a private system maintained by the Test Corporation"

snmp-server community "public" unrestricted

snmp-server contact "Admin" location "Masta Office BoxRoom"