My220x Posted July 17, 2008 Author Posted July 17, 2008 ok when i get home i will run the local ssh and then try and ping the ip and will then note down the results from ifconfig and post it here.
My220x Posted July 17, 2008 Author Posted July 17, 2008 Ok, localssh works fine, however I cant ping via my physical machine, I get timed out. Results of ifconfig: eth0 Link encap:Ethernet HWaddr 08:00:27:29:61:f1 inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe29:61f1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11 errors:0 dropped:0 overruns:0 frame:0 TX packets:44 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1470 (1.4 KB) TX bytes:5382 (5.2 KB) Interrupt:11 Base address:0xc020 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:452 errors:0 dropped:0 overruns:0 frame:0 TX packets:452 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:27932 (27.2 KB) TX bytes:27932 (27.2 KB)
kmount Posted July 17, 2008 Posted July 17, 2008 What's the output of ipconfig /all on your local machine?
My220x Posted July 17, 2008 Author Posted July 17, 2008 What's the output of ipconfig /all on your local machine? Microsoft Windows [Version 6.0.6000] Copyright © 2006 Microsoft Corporation. All rights reserved. C:\Users\Daniel>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Daniel-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : lan Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : lan Description . . . . . . . . . . . : SiS191 Ethernet Controller Physical Address. . . . . . . . . : 00-1C-25-89-21-E9 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9dcf:6232:f21:5a04%8(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.64(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 17 July 2008 05:34:10 Lease Expires . . . . . . . . . . : 18 July 2008 06:32:17 Default Gateway . . . . . . . . . : 192.168.1.254 DHCP Server . . . . . . . . . . . : 192.168.1.254 DHCPv6 IAID . . . . . . . . . . . : 134218092 DNS Servers . . . . . . . . . . . : 192.168.1.254 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 6: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 02-00-54-55-4E-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:d5c7:a2ca:34:21df:3f57:febf(Prefer red) Link-local IPv6 Address . . . . . : fe80::34:21df:3f57:febf%10(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled Tunnel adapter Local Area Connection* 7: Connection-specific DNS Suffix . : lan Description . . . . . . . . . . . : isatap.lan Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::5efe:192.168.1.64%9(Preferred) Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.1.254 NetBIOS over Tcpip. . . . . . . . : Disabled C:\Users\Daniel>
kmount Posted July 17, 2008 Posted July 17, 2008 So given your vm is on the 10.* range and your PC is on the 192.* it's unlikely without some clever routing it will work. I suggest you look in VMWare at what network settings you assigned for your VM. I'd think you've set Host-Only and it needs to be Bridged so it gets an IP 192.x.x.x from your DHCP(Router?).
My220x Posted July 17, 2008 Author Posted July 17, 2008 So given your vm is on the 10.* range and your PC is on the 192.* it's unlikely without some clever routing it will work. I suggest you look in VMWare at what network settings you assigned for your VM. I'd think you've set Host-Only and it needs to be Bridged so it gets an IP 192.x.x.x from your DHCP(Router?). I am using VirtualBox.
kmount Posted July 17, 2008 Posted July 17, 2008 I've had a quick look at the manual but without downloading and installing its difficult to troubleshoot. It would appear that in NAT mode that there are some known issues surrounding the ICMP implementation but it shouldn't be an issue here. OK, forgetting VirtualBox for a minute, run iptables -L and report that back, along with checking system-config-securitylevel to ensure SELinux and the Firewall are disabled.
kmount Posted July 17, 2008 Posted July 17, 2008 Or install logmein (on your host PC) and let me have a look.
dhicks Posted July 17, 2008 Posted July 17, 2008 I am using VirtualBox. I use VirtualBox on my home Windows XP Home machine. Did the VirtualBox network bridge install okay - under "Network Connections" (or whatever the heck the Vista equivalent is these days) do you have connections labelled "VirtualBox Host Interface 1" and "Network Bridge" or similar, and does your Local Area Connection connection status read "Connected, Bridged"? A network "bridge" is basically the software equivalent of a switch - you're plugging a bunch of network connections (one real, others virtual) into a virtual switch so your virtual connections can all share your real connection. -- David Hicks
My220x Posted July 18, 2008 Author Posted July 18, 2008 I decided to use VMware Server at the end, thanks everyone who tried to help and thanks kmount for taking a look
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now