Data Harvest (Easy Sense)

[irsprint]

We've had to do a few rebuilds and install the Easy sense hardware. There are drivers on the dataharvest website that we've used and they install but when configuring the easysense software it says 'cant connect to com port' (The connector is a USB to serial one)

 

Now we have a few that do work but ths is with drivers that came with the software package many moons ago, which we dont have.

 

So can anyone help? or have old drivers for this thing?

[plexer]

You need drivers for the data harvest usb to serial converters?

 

Ben

[irsprint]

Yes, if possible, but tried the ones from the Data Harvest website and 'dont' seem to work.

[plexer]

Do you have a pic of the converter?

 

Ben

[plexer]

Try these.

 

Ben

DH.zip

[irsprint]

I might be able to get one for tomm, its just grey with box in the middle of it. Nothing disguinising but been informed came with original pack from 'Data Harvest'

[plexer]

The drivers I uploaded were for one like this:

[irsprint]

Exactly the one! I will try these on Friday as having broadband installed tommorrow but will message back with any feedback, thanks again.

[plexer]

Were the drivers from data harvest that you tried this one ?

 

http://www.data-harvest.co.uk/downloads2/Drivers/3009_USB_PC.zip

 

From the legacy page?

 

Data Harvest Ltd - Downloads - Drivers

 

Ben

[ANiceEnglishman]

I had a similar problem and their tech support sent me detailed instructions. Don't have them to hand as I'm at home but drop them an email - they were very helpful.

[SimpleSi]

they were very helpful.

 

Agreed - they've always been very helpful with me as well

 

regards

Simon