MDT Deployment Failure (5624): 5 run DISM

[TacoMx]

Hello,

I have an issue with MDT since their last update :

it happen between 90-100% of the deployment.

i don't have any useful log (the deployment doesn't finish )

 

So, to explain a bit better, for my work i have 2 type of pc :

Old pc (<2020) and new pc (>2020)

 

 

This bug appear only with new pc.

Old pc working fine.

The procedure is exactly the same for both.

MDT and ADK has the latest version.

 

I tried almost everything i found related to this error (5624), the uefi fix, old mdt version, "continue on error" with task sequence but nothing works. I got this problem for month, i was hoping there would be a fix someday but no.

 

I have to use old pc, upadte my image on them, then deploy this image on new pc but i lose a lot of time. I would just want to make an image from my new pc, then deploy it on the other new.

 

I saw may be it happen cause of DISM but what is the difference between new pc and old pc ? A settings in the bios may be ?

 

 

Sorry for the english i hope you will understand

[silvestre]

From the error it looks like you need to add your network drivers form the new pc in your boot image

[TacoMx]

Hello,

 

I already tried but nothing has change.

The thing i don't understand is that it fail only with "new" pc.

That would mean the error doesn't come from the Windows version 21h1 or 20h2 but from a settings inside the pc right ?

 

I can make an image of a Dell latitude 5480 for example, with 21h1 --> no problem

If i do exactly the same on a 5490, it will fail.

 

My 5480 has the latest drivers, bios up to date of course so their should be no difference between them... I really don't get.

Thank you for your answer

[silvestre]

What did you try? Did you add drivers ? Where did you add the drivers ?

[TacoMx]

In the out-of-box drivers section of mdt. I tried the full set drivers of my model and only the ethernet driver but either way it is the same result.

 

I deploy my image with a flash drive.

For information, i tried to deploy the image in a vm but same error.

[silvestre]

Add the Ethernet drivers to the boot image for that particular model

[TacoMx]

You mean with DISM ?

[silvestre]

https://community.spiceworks.com/how_to/116865-add-drivers-to-mdt-all-versions-total-control-method

[TacoMx]

I got 10 errors and 2 warnings instead of 10 errors and 5 warning, but it still bug at the same moment (around 90%)

[silvestre]

Did you update MDT and ADK?

[TacoMx]

Yes, i even tried the adk for W11, older ADK, but still same error.

[TacoMx]

After 10 000 try i finally found the problem :

kb5005101 ( optional... next time i ll not bother with these optional update!!!!)

 

I don't know what specificially in this update but once it's gone.... all is working like before.

 

Thanks for trying to help me Silvestre.

Edited September 15, 2021 by TacoMx