New vlan problem

[chris11256]

Hi All,

 

We've got a fustrating problem while connecting our BMS to the network. I've created a new vlan(90) and assigned the IP(192.168.1.1 BMS controllers are preprogrammed with this range) to the vlan. I can ping the BMS controller(192.168.1.15) from the core switch, but not if I use another vlan as the source address. For testing purposes I removed any ACL's and still couldn't ping.

 

On a show IP route on the core it confirms that the 192.168.1.0 network is there, but I can't ping the controller from a computer on a different vlan.

 

Does anyone have any suggestions? At this point vlan 90 has no ACL's applied to it, our desktop pc's vlan has permit IP and permit ICMP statements to cover traffic going to vlan 90.

Edited February 24, 2021 by chris11256

[chris11256]

Sorted it!

 

Where it's an oldish BMS it hadn't got a default gateway set, it never needed one before now. After setting that everything is now working.