ACL on hp 1920 switch

[steveritus]

Hi,

 

I have not used acls before but need to create some to direct 2 different subsets to different gateways - for guest WiFi

 

Our 172.* addresses need to go to one, whilst our 10.* addresses go to another.

 

Any help would be much appreciated

[snagrat]

You wouldn’t need ACLs for this.

 

Just use different DHCP scopes to set the different gateways.

[steveritus]

Thanks for the quick response. Initially I didn’t think so either. But when both gateways are connected to the switch, it all stops working. Both gateways are fine individually. Have tried on different vlans. So someone suggested acls

[snagrat]

Are you doing any inter-vlan routing? Or are both gateways on the same subnet as the clients?

[steveritus]

Have 2 vlans each on different subnets

[snagrat]

So each gateway should be connected to the switches on untagged ports

[steveritus]

Yep, untangled ports. No inter vlan routing. Gateways are on same subnet as respective clients. If either of the gateways is plugged in the clients on that subnet have connection. As soon as both gateways are connected to the switch, it all stops.