hotwired007 Posted May 8, 2008 Posted May 8, 2008 hi, when i started my new job i got given an acer aspire 3560 laptops to use as my laptop... i'm being restricted by the fact i can get into bios and change some of the settings... the previous tech says he didn't put a password on it... so therefore doesn't know what it is... does anyone know how to reset the password or even know if there is a way a BIOS password could have been installed with a piece of software or something? thanks in advance
FN-GM Posted May 8, 2008 Posted May 8, 2008 I recently pulled apart 2 broken Acers to make one good one. Its not to hard just take your time with it. You can do that and pull out the battery on the motherboard for a few mins, that will sort it.
hotwired007 Posted May 8, 2008 Author Posted May 8, 2008 any ideas where the battery is? i thought it might have been soldered onto the motherboard... i've had laptops like that before... replacement was always fun!
FN-GM Posted May 8, 2008 Posted May 8, 2008 I can't remember sorry. It’s my day off today, in the office we have an Acer Aspire 3000 series in bits i can check tomorrow for you. Z
teejay Posted May 8, 2008 Posted May 8, 2008 Most acer laptops have a way to flash the bios in 'crisis mode'. If you go onto the acer support website and download the dos based flash update in the readme file it should tell you how to do a crisis update of the bios.
FN-GM Posted May 8, 2008 Posted May 8, 2008 If you send me a e-mail to remind me tomorrow please? My address is in my profile.
Gerry Posted May 8, 2008 Posted May 8, 2008 Found these sites: Backdoor passwords More BIOS Resetting Methods CmosPwd - software that can apparently decrypt the password
hotwired007 Posted May 8, 2008 Author Posted May 8, 2008 well ive had the laptop apart.. hence my downtime lol... i can't find the cmos battery although i'm assuming its under my keyboard... previous techy looks like he's bodged one of the screws up... completely rounded off the slot for the screwdriver plus several missing screws tried the cmospwd program... Acer/IBM [ ][* ] AMI BIOS [] AMI WinBIOS (12/15/93) [] AMI WinBIOS 2.5 [][ f 6 4][" ][F ] AMI ? [ 6 4 1][ ][W 6 4 1][][ 1] Award 4.5x/6.0 [20121231][1010210][3332300] Award 4.5x/6.0 [010200][010100][323133][2311330] Award Medallion 6.0 [011300][000100][30000333][000100] Award 6.0 [][ ][ 6c P a ][] Compaq (1992) [] Compaq DeskPro [][] Compaq [ ][] DTK [$PVP][rP6x\1] IBM (PS/2, Activa ...) [P][] IBM Thinkpad boot pwd [] Thinkpad x20/570/t20 EEPROM [][] Thinkpad 560x EEPROM [][ ] Thinkpad 765/380z EEPROM [][ ] IBM 300 GL [P] Packard Bell Supervisor/User [ ] [ ] Phoenix 1.00.09.AC0 (1994) [] Phoenix a486 1.03 err Phoenix 1.04 [s ][P] Phoenix 1.10 A03 CRC pwd err Phoenix 4 release 6 (User) [P ] Phoenix 4.0 release 6.0 [M3] Phoenix 4.05 rev 1.02.943 [][3 ] Phoenix 4.06 rev 1.13.1107 [] Phoenix A08, 1993 [ J ][ ] Gateway Solo Phoenix 4.0 r6 [ ][OP] Samsung P25 [][][] Sony Vaio EEPROM [* ] [ !] Toshiba [QREERTR][TDDQET] Zenith AMI Supervisor/User [] [] i think its a phoenix bios BUT i don't know what version... next step the backdoor keys unless someone else has any ideas?
mrtechsystems Posted May 8, 2008 Posted May 8, 2008 Acer Aspire 1800 I had with the same problem fitted with new BIOS Security chips I think I paid 65.00 for bios password removal
hotwired007 Posted May 8, 2008 Author Posted May 8, 2008 tried the backdoor keys... will try the crisis thingy...
hotwired007 Posted May 8, 2008 Author Posted May 8, 2008 no luck with the BIOS updates... wouldn't accept anuything i could download... although i've managed to download esettings that gives me access to the BIOS password from windows...
hotwired007 Posted May 8, 2008 Author Posted May 8, 2008 YAY! I fixed it Although it does say everywhere not to use it i rread a couple of posts that it worked on... cmospwd /k it worked on mine!
jhone Posted November 2, 2009 Posted November 2, 2009 A. By Using the Motherboard Jumper: In most motherboards CMOS battery is soldered, which makes it difficult to remove the battery. In this case we use another method. Almost all motherboards contain a jumper that can clear all CMOS settings along with the BIOS password. The location of this jumper varies depending upon the motherboard brand. You should read your motherboard manual to check its location. If you don't have the manual then look for the jumpers near the CMOS battery. Most of the manufacturer label the jumper as CLR, CLEAR, CLEAR CMOS, etc. When you find the jumper, look carefully. There will be 3 pins and the jumper will be joining the center pin to either left or right pin. What you need to do, is remove the jumper and join the center pin to the opposite pin. e.g. if the jumper joins center pin to left pin, then remove it and join center pin to right pin. Now wait for a few seconds and then again remove the jumper and join the center pin to left pin. Make sure to turn the PC off before opening the cabinet and resetting the jumper. B. By Using Software: I have found that BIOS/CMOS Password Recovery Tool is the most effective.: BIOS/CMOS Password Recovery Tool is a program that works instantly to remove any lost or forgotten BIOS/CMOS password. Simply boot your PC to DOS and execute the program, and get access to forgotten BIOS/CMOS passwords in just seconds BIOS/CMOS Password Recovery Tool Service: BIOS Password Recovery - BIOS Password Recovery Tool - Remove or Clear BIOS Password
plexer Posted November 2, 2009 Posted November 2, 2009 A. By Using the Motherboard Jumper: In most motherboards CMOS battery is soldered, which makes it difficult to remove the battery. In this case we use another method. Almost all motherboards contain a jumper that can clear all CMOS settings along with the BIOS password. The location of this jumper varies depending upon the motherboard brand. You should read your motherboard manual to check its location. If you don't have the manual then look for the jumpers near the CMOS battery. Most of the manufacturer label the jumper as CLR, CLEAR, CLEAR CMOS, etc. When you find the jumper, look carefully. There will be 3 pins and the jumper will be joining the center pin to either left or right pin. What you need to do, is remove the jumper and join the center pin to the opposite pin. e.g. if the jumper joins center pin to left pin, then remove it and join center pin to right pin. Now wait for a few seconds and then again remove the jumper and join the center pin to left pin. Make sure to turn the PC off before opening the cabinet and resetting the jumper. I have never ever seen a laptop motherboard with a jumper on it to reset the bios this is only normally found on normal boards. Ben
lgwalker001 Posted December 29, 2010 Posted December 29, 2010 This method to clear the jumper settings worked for me. Thanks very much for the info.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now