Jump to content

Recommended Posts

Posted

We are having a problem with one of our Sony projectors, about 3 weeks ago the build went before it's time. Not a problem replaced the build and gave the whole thing a good spray dusting, reset the timer and all was well.

 

That lasted 4 days, then it kept refusing to turn on, it would start to power up but after a couple of minutes would shut down and claim the build has gone again. Occasionaly it will power on and last the whole day but it's a rare thing.

 

Any ideas as to what could be wrong, it is 5 years old and out of warrenty so i'm guessing it's gonna be easier to just replace the projector.

Posted

We have a Sony projector (VPL-VX70) ours developed a problem like yours, it would randomly refuse to come on for some reason. Sent it back to Sony luckily it was just inside the warranty, they did'nt tell us what was wrong(even though we asked).

I know not a lot of help but I guess its a new projector

Posted
could be a temperature issue, is near any heating ducts? if you have hot air blowing on or circulating around the projector then its going to turn off to protect the bulb, and electronics.
Posted

Could be an temperature issue?

 

I've had problems in the past where projectors will randomly switch off because the temperature in the room got too high. Especially science labs when they had a few bunsens on :)

 

I did have a Sanyo projector once which had a simelar problem. After consulting the Google oracle I found a service manual and managed to up the fan speed.

It was slightly noisier but stayed on.

 

Hope this advice is helpful.....

Posted

It is mounted in the middle of the ceiling, no heating on at moment in school and even at 8am this morning when she first tried it still wouldn't work so not sure it's a heat issue.

 

Think i better get a quote for a new projector lol...

Posted
Both have been done still nothing.

 

may aswell open it up and clean the thing. you say it sometimes stays on all day and times it dosent come on at all. its def a heat problem, i would open it and give it a good clean out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...