Unifi secure gateway pro NAT

[hallb15]

I've setup port forwarding on our unifi secure gateway pro to allow external monitoring of the CCTV system. This is working using the first available external IP addr given by our ISP, i.e. xxx.xxx.xxx.161.

We have 4 available external IP addrs so I now want to add a new rule for our phone system which is on a different internal IP addr.

 

So I want to be able to remotely access the phone system on xxx.xxx.xxx.162 but I don't seem to be able to find any way of adding the 'incoming' IP address into the port forwarding rules. There isn't a specific NAT section within the unifi controller software - just port forwarding.

 

Anyone got a similar setup with the unifi secure gateway working?

[ZeroHour]

I think this may still be a CLI job, I have the EdgeRouter so I cant test here.

This: https://community.ubnt.com/t5/UniFi-Routing-Switching/USG-Pro-Multiple-WAN-IPS-mapped-to-various-internal-locations/td-p/1770942 seems to make sense though.

[hallb15]

I think this may still be a CLI job, I have the EdgeRouter so I cant test here.

This: https://community.ubnt.com/t5/UniFi-Routing-Switching/USG-Pro-Multiple-WAN-IPS-mapped-to-various-internal-locations/td-p/1770942 seems to make sense though.

 

Thanks - that's exactly what I need to do. This is the first time I've come across a config.gateway.json file so i'll take it steady...

It seems odd that everything else on the device (that I've needed to do anyway) is configurable through the web interface. When I SSH into the gateway it comes up with EdgeOS so it seems this device is kind of a crossover between the Edge and Unifi ranges.