HP ProBook 4530s on an RM CC4 network

[theo_logical]

Is anyone building HP ProBook 4530s laptops on an RM CC4 network? If so, can you tell me what Win7 64bit NIC drivers you're using in the build disk?

 

I have tried using drivers from the HP site and extracting the drivers from an existing machine with double driver without success.

 

Thanks

[BOOT]

Using 32 bit drivers in the build disk. Needed to import both 32 and 64 bit drivers. (And there's more than one NIC make\model)

[theo_logical]

Many thanks Boot3988

 

I don't suppose you can tell me the version of the Realtek driver your're using can you?

[BOOT]

It's 7.61.612.2012. I expect there's a more recent version than that by now.

[theo_logical]

Thanks for your help Boot3988

 

But I downloaded the version you suggested and added the 32bit version to my build disk, but without success, we get as far as selecting the build disk and then no further.

[foofighterjim]

What version of the build disk are you using? If it is WinPE 2.0 then this is based on Vista and not Windows 7, RM do not recommend using this image for builds anymore. You should be using the WinPE 3.1 image for Windows 7 builds.

[theo_logical]

Thanks for your help, I suspect the problem is that I am not understanding how to get drivers to apply to the image from the RMMC Build disk .. I guess I need to do some reading

[the_wuigi]

Thanks for your help, I suspect the problem is that I am not understanding how to get drivers to apply to the image from the RMMC Build disk .. I guess I need to do some reading

 

You need to regenerate your build disk and then replace the wim file in wds