enjay Posted April 12, 2017 Posted April 12, 2017 I'm trying to get Google Expeditions running, but my devices can't see each other, they just sit there saying "looking for guide" or "looking for explorers". It works a treat at home, but not in school. A Lightspeed report on the two devices doesn't show anything being blocked; all outbound firewall ports are open. Any ideas?
flyinghaggis Posted April 12, 2017 Posted April 12, 2017 (edited) We had the same problem. I'd guess it's an issue with the network traffic not traversing subnets/VLANS but I couldn't find anything in Google's documentation to indicate which ports/etc it uses nor time to investigate it in any depth. We ended up just buying a local wireless hub for the devices to connect to. You can use the service offline if everyone using it downloads the 'expeditions' to their device before connecting to the standalone Wi-Fi hub. Hopefully someone can suggest a better solution though as the local Wi-Fi hub is a bit of a kludge. Edited April 12, 2017 by flyinghaggis
enjay Posted April 12, 2017 Author Posted April 12, 2017 (edited) I'd guess it's an issue with the network traffic not traversing subnets/VLANS My devices are in the same VLAN I couldn't find anything in Google's documentation to indicate which ports/etc it uses All outbound firewall ports are open, plus as you said you don't need Internet connectivity so I don't think it is going through our Internet firewall anyway. 99% sure we're not port blocking internally, but I'll check that. We ended up just buying a local wireless hub for the devices to connect to. You can use the service offline if everyone using it downloads the 'expeditions' to their device before connecting to the standalone Wi-Fi hub. That's an option, I suppose. So, all I would need is a cheapy home wifi router, plug it in, connect everyone to it and then start using it, yes? Edited April 12, 2017 by enjay
enjay Posted April 12, 2017 Author Posted April 12, 2017 We ended up just buying a local wireless hub for the devices to connect to. You can use the service offline if everyone using it downloads the 'expeditions' to their device before connecting to the standalone Wi-Fi hub. Hopefully someone can suggest a better solution though as the local Wi-Fi hub is a bit of a kludge. That set me thinking - it also works if you set up a phone as a hotspot. I'd only want to do that on a phone with an unlimited data plan though. Still a bodge, though.
flyinghaggis Posted April 12, 2017 Posted April 12, 2017 My devices are in the same VLAN Same subnet?
enjay Posted April 12, 2017 Author Posted April 12, 2017 Same subnet? Yes. We're probably blocking P2P internally, next step is to work out where, how and whether I want to disable that!
markwilfan Posted April 13, 2017 Posted April 13, 2017 I used this https://www.rsaeks.com/?p=469 as a basis for creating the correct mdns service in our aruba controller
enjay Posted April 13, 2017 Author Posted April 13, 2017 I used this https://www.rsaeks.com/?p=469 as a basis for creating the correct mdns service in our aruba controller Thanks. Service Control / Bonjour is currently disabled on our network, but I need to turn it back on to get AirPlay running properly again so maybe that will get Expeditions working too...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now