leachim Posted August 26, 2016 Posted August 26, 2016 Can't determine what these beeps mean https://vimeo.com/180330051 No display, no fan - lights flash Any ideas ? Thanks
round2it Posted August 26, 2016 Posted August 26, 2016 (edited) How to Use and Troubleshoot the XPS 13 (9343) | Dell US Look at computer fails to start section CMOS battery and ram would be my first place to look Edited August 26, 2016 by round2it
leachim Posted August 26, 2016 Author Posted August 26, 2016 Yeah, I saw this but can't work out how many beeps ?? Fan doesn't come on either ??
round2it Posted August 26, 2016 Posted August 26, 2016 (edited) It's either one or 5 fast beeps but from experience of dell laptops it may possibly be a main board failure Test the fan with a battery to see if it's working the laptop may shut down to protect itself if the fan is not working. Edited August 26, 2016 by round2it
Guest MD5T Posted August 26, 2016 Posted August 26, 2016 Normally ram causes this but on researching Google looks like system board failure.
leachim Posted August 27, 2016 Author Posted August 27, 2016 Sadly the ram is soldered onto the board so cannot be tested
leachim Posted August 28, 2016 Author Posted August 28, 2016 I took the bios battery out and put it back again after 1 hour Not sure how long it is supposed to be....
difinity Posted August 28, 2016 Posted August 28, 2016 I took the bios battery out and put it back again after 1 hour Not sure how long it is supposed to be.... Sadly that won't work, the BIOS chip needs removing from the board, programming in an external programmer then soldering back on the board.
NviGate_Systems Posted September 6, 2016 Posted September 6, 2016 How to Use and Troubleshoot the XPS 13 (9343) | Dell Ireland This indicates board failure. Most systems *should* post even if the CMOS battery is dead/defective. CMOS battery handles storing of BIOS config, it's not like in the old days when you entered LBA's for your drive. ;-)
difinity Posted September 7, 2016 Posted September 7, 2016 This indicates board failure. Most systems *should* post even if the CMOS battery is dead/defective. CMOS battery handles storing of BIOS config, it's not like in the old days when you entered LBA's for your drive. ;-) A laptop won't POST if the BIOS is corrupted. I wouldn't suggest a board has failed when 80%+ of motherboards I see can be repaired.
NviGate_Systems Posted September 11, 2016 Posted September 11, 2016 Sorry, didn't mean to imply no-one could recover it, just that for the majority, it's not a skillset we have. Op did not mention any activity prior to the beeps, so if it was a failed BIOS update, yes that would require reflash or ROM swamp, but rom swap is a matter of expertise in most laptops, in which case I would say only about 20% of techs would have the needed skills to use a rework station to take the old one off and solder a new one in if it's a SMD. The CMOS/BIOS is part of the board, and any failure of a component on the board typically means board = dead. From one standpoint. Most systems I have serviced still POST if the settings are corrupted, the simply will state checksum bad. Now if the actual ROM memory is damaged and it can't start POST, then that's a different beast. Anyways, leachim, update us on what happened, we'd love to know. David
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now