Resetting Web SyncThru password for Samsung ML-2955ND Printer

[tsh]

I saw the thread http://www.edugeek.net/forums/windows/29720-samsung-webmin-password-needs-reseting-2.html about resetting web password, but it didn't work.

 

I have a Samsung ML-2955ND printer and need the web SyncThru password reset. I have tried admin and sec00000, but that didn't work. Also tried leaving ID blank and using last 8 of MAC address, but that didn't work either.

 

Thanks for any assistance you can provide.

[nelsonsdive]

Finally found it at Samsungs site:

How To Reset Your SyncThru Password For A Printer With No Display Menu

 

[h=4]How To Reset Your SyncThru Password For A Printer With No Display Menu[/h] If the SyncThru Web Service login ID and/or password needs to be reset on a printer without a LCD display menu, the printer network settings need to be cleared to do so.

To clear the network settings:

 

1. Connect the printer to the PC via USB cable
   
2. Open Easy Printer Manager. Click the Easy Printer Manager icon (http://support-us.samsung.com/cyber/namo/namo_fileview.jsp?type=nfs&pid=decisiontree&did=545801&[email protected]&sep=%7C) in the task tray on the bottom right of the desktop.Note: If Easy Printer Manager is not installed, click here to open the web-based installer and select the software.
   http://support-us.samsung.com/cyber/namo/namo_fileview.jsp?type=nfs&pid=decisiontree&did=545801&[email protected]&sep=%7C
   

 

1. Switch Easy Printer Manager to Advanced mode by clicking the Advanced mode button.http://support-us.samsung.com/cyber/namo/namo_fileview.jsp?type=nfs&pid=decisiontree&did=545801&[email protected]&sep=%7C
   

 

1. Select your USB connected printer, and click Device Settings.http://support-us.samsung.com/cyber/namo/namo_fileview.jsp?type=nfs&pid=decisiontree&did=545801&[email protected]&sep=%7C
   

 

1. Click the Network tab and scroll down to the bottom of the window.http://support-us.samsung.com/cyber/namo/namo_fileview.jsp?type=nfs&pid=decisiontree&did=545801&[email protected]&sep=%7C
   

 

1. Click the Clear button.Important: This will clear all network settings, not just the Syncthru Web Service ID/Password. The printer will need to be reconnected to the network after clearing the network settings.
   http://support-us.samsung.com/cyber/namo/namo_fileview.jsp?type=nfs&pid=decisiontree&did=545801&[email protected]&sep=%7C
   

 

1. Click OK to confirm the settings should be cleared.
   
2. Power off the printer, then power it back on after a minute.
   

All network settings (including the SWS password) will be reset. If you had manually configured the IP information or were connected to a wireless network, you will need to re-enter those settings now. The login information will default back to "admin" as the ID and the password will be "sec00000".

[tsh]

Does anyone have a solution for this? The Easy Printer Manager with version 2.0.1.245(5/30/2018) doesn't have a CLEAR button, it does have a DEFAULT button, but that doesn't seem to clear the syncthru password. Thank you.