Email Disclaimer not deploying - Running on Server 2008 SP2 & Exchange 2007 SP1

[mo_vigilante]

Hi all, I'm trying to deploy a corporate email disclaimer which I've set up but it's not sending to to internal and external messages. Running on a 2008 platform where all servers running on Server 2008 SP2 including mail server which is Exchange 2007 SP1.

 

I've created 2 disclaimers - one for internal use and one for external use (Edge Transport Rule). For the internal rule, I've setup the following conditions: -

 

- From users inside and outside the organisation & sent to users inside and outside the organisation (Both scopes I've set to 'INSIDE' for these conditions)

- Append disclaimer with text (this is where I've put our corporate disclaimer)

- No exceptions for this is needed for this rule

 

A seperate external rule I've setup with the same conditions - only difference is the scope which is 'OUTSIDE'. The internal rule priority is 0 and the external rule is 1.

 

I think I've set it up accordingly, but am I missing something? As when sending test messages both internal and external, it isn't putting the disclaimer at the bottom of the message!

 

Any ideas?

 

Thanks.

[sukh]

I'd 1st upgrade to SP3 RU6, SP1 isn't supported anymore and there have been a number of changes, then I would focus on this.

[mo_vigilante]

Thanks for that,

 

Am I right in saying Exchange 2007 SP2 will work on Server 2008 SP2? (Not R2 edition)

 

Also is Exchange 2007 SP3 ONLY compatible at the moment for 2008 R2?

 

Thanks.

[mo_vigilante]

We have Server 2008 in place, not the R2 edition which I forgot to mention above.

 

Thanks.

[sukh]

Again leave Exch SP2, that isn;t supported anymore either. SP3 support W2k8 SP and R2

[mo_vigilante]

OK thanks for your help - I'll try that.