sted Posted July 15, 2011 Posted July 15, 2011 i have been trying to deploy xp via mdt with the regional setup etc as uk rather than us. Tried sysprep which seems to help a bit and just tried editing the tasks unattend.txt to the below [Data] AutoPartition=1 MsDosInitiated="0" UnattendedInstall="Yes" [unattended] UnattendMode = FullUnattended OemSkipEula = Yes OemPreinstall = Yes OemPnPDriversPath = "\Drivers" TargetPath = \Windows DriverSigningPolicy = Ignore DUDisable = Yes DUStopOnError = No ; ExtendOemPartition = 1 ; If Set extends disk partition to end of disk or by x MB ; FileSystem = ConvertNTFS ; Specify wheter to leave filesystem alone or convert to NTFS ; AutoActivate = No ; Determines if Windows should auto activate over Internet ; ActivateProxy = Proxy ; Proxy Setting to use when auto activating windows CrashDumpSetting = 3 ; 3=small memory dump 0-3 DisableDynamicUpdates = Yes ; Don't go get updates from Internet during install Hibernation = Yes ; Yes=Enables hibernation, No=Disabled hibernation WaitForReboot = No ; Yes=Wait 15seconds after guimode setup to reboot ; ComputerType = ; Defines Custom HAL type ; Factory = Yes ; Used in conjuction with OPK If yes will not delete Sysprep directory ; ForceHalDetection = No ; Used in upgrades to keep previous hal Keyboardlayout = "United Kingdom ; Allows specification of keyboard type ; NTUpgrade = No ; Indicates whether or not this is an OS upgrade ; OverwriteOEMFilesOnUpgrade = 0 ; Indicates whether OEM files should be overwritten ; Repartition = 1 ; Only when booting to CD specify 1 to repartition hard disk ; UnattendSwitch = No ; Set to yes during winnt installation to skip welcome ; Win9xUpgrade = No ; Indicats if this is an upgrade and to use [Win9xUpg] section [uninstall] ; This section has settings to allow an upgraded system to be uninstalled [GuiRunOnce] "cscript.exe C:\MININT\Scripts\LiteTouch.wsf /start" "cscript.exe D:\MININT\Scripts\LiteTouch.wsf /start" "cscript.exe E:\MININT\Scripts\LiteTouch.wsf /start" "cscript.exe F:\MININT\Scripts\LiteTouch.wsf /start" [LicenseFilePrintData] AutoMode=PerSeat ; Licensing Mode usually perseat ; AutoUsers=50 ; When in PerServer mode=number of licenses [RegionalSettings] ; IF this section is used the Winnt32.exe /copysource:lang setting must be specified ; InputLocale_DefaultUser= ; Specifies the Inputlocal and keyboard setting for default user ; UserLocale_DefaultUser= ; Locale ID for default User ; InputLocale ; Locale\Keyboard combinations to be installed Language = 0809 ; language locale to be installed LanguageGroup = 2 ; Language Group to be installed SystemLocale=0809:00000809 ; System Locale to be specified ; UserLocale= ; User Locale setting [GuiUnattended] ; Arguments= ; Used with Detached programs to provide arguments OEMSkipRegional=1 ; Indicates Regional info GUI to be skipped in setup ; EncryptedAdminPassword=No ; For OEMs allows use of hashpwd.exe cannot be used with autologon TimeZone="010" ; Sets Timezone 010=Mountain OemSkipWelcome=1 ; Used to skip welcome screens in GUI setup ; ProfilesDir="" ; Allows to change default location of profiles AutoLogon="Yes" ; Indicates that system should autologon after reboot AutoLogonCount=999 ; Number of times to auto logon ; DetachedProgram="" ; Specifies programs to run concurrently with Setup AdminPassword="fredfrog" [identification] JoinWorkgroup=WORKGROUP ; CreateComputerAccountInDomain=Yes ; JoinDomain="CONTOSO" ; MachineObjectOU= "OU=Workstations, dc=contoso, dc=com" ; DomainAdmin="Contoso\Administrator" ; DomainAdminPassword="password" [userData] ComputerName=* FullName="somewhere" OrgName="over the rainbow" ProductKey="abcde-abcde-abcde-abcde" [Display] BitsPerPel=16 ; Number of colors in display Xresolution=1024 ; X resolution typically 1024 YResolution=768 ; Y resolution typically 768 Vrefresh=60 ; Vertical refresh rate [MassStorageDrivers] ; Used when custom disk drivers must be specified ; Enter the description name =Retail or OEM [OEMBootFiles] ; This section is used to specify custom HALs, and also maps to the Mass Storage Device section [OsChooser] ; Used by RIS Clients Only (the rest is untouched as is most of that but was too long to post but when i try and use the task i just get an error screen (cunningly hidden behind another window grrr)
computer_expert Posted July 15, 2011 Posted July 15, 2011 looks fine to me apart from the missing " after Keyboardlayout = "United Kingdom. You may also want to change the timezone from 010 to 085 for the UK/GMT time zone. 1
sted Posted July 15, 2011 Author Posted July 15, 2011 thanks that got it now i just need to work out why my dotnet 3.5 application fails error 2 no system restore state or some such lol
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now