HP 4108GL Time and Date

[DAckroyd]

does anyone know how to set the clock on an HP 4108gl? it's currently saying it's Jan 1990 so might be slightly wrong?

[plexer]

Telnet to it.

 

Type menu at the command prompt.

 

Switch configuration.

 

System information.

 

Set sync method to sntp and enter a time server.

 

Ben

[Ric_]

ssh/telnet to its IP address and then type 'menu' and select 'Run Setup'

 

edit: Of course, that's assuming that you set an IP... otherwise you will need a console cable.

[plexer]

Or.

 

Telent/ssh

 

configure to enter config mode and then time.

 

4108GL(config)# time

begin-date The begin date of daylight savings time

MM/DD[/[YY]YY] New date

daylight-time-rule The daylight savings time rule for your location

end-date The end date of daylight savings time

HH:MM[:SS] New time

timezone The number of minutes your location is West(-) or

East(+) of GMT

 

or timesync

 

4108GL(config)# timesync

Incomplete input: timesync

4108GL(config)# timesync

sntp Set the time protocol to SNTP

timep Set the time protocol to the network time protocol

 

Ben

[DAckroyd]

thanks for the help! I went with manually setting it in the end - easiest way