LGFL IP Allocation Through PFSence

[kyle141]

A partner school of ours is looking to move to LGFL broadband. I understand this will entail setting up a new IP range for the site on the 10.X.X.X range

They currently use the below range set by the current LA

 

Name	Subnet	Start	End	Mask
Servers / Switching	172.19.195.0	172.19.195.1	172.19.195.254	255.255.255.0
Voice	172.28.72.0	172.28.72.1	172.28.72.254	255.255.255.0
staff	172.28.73.0	172.28.73.1	172.28.73.254	255.255.255.0
Students	172.28.75.0	172.28.75.1	172.28.75.254	255.255.255.0
Printing	172.28.77.0	172.28.77.1	172.28.77.126	255.255.255.128

 

Has anyone used a local PFSence to keep their previous server ranges intact and utilise the new range provided by LGFL for their staff / student DHCP pool ?

Thanks

[FN-GM]

If you NAT the addresses for the server VLAN it should be fine.

 

If you didn’t want to change any device IP maybe NAT the entire lot?