Dell VRTX Network Config

[lmrogers]

Morning,

 

I am just setting up a new server infrastructure using a Dell VRTX Unit. I have got 2 blades and a 1gig network module in the vrtx. I have connected to the network and configured a trunk for each blade on the HP switching with lacp and created the nic team on there servers. NIC team is working and works fine no lacp errors. I am however having trouble getting it to work with the VLANs.

 

Has anyone ever set this up on a VRTX before that can help?

 

Cheers

[SpaceInvader83]

If i remember from when I did ours ,setup internal and external ports as trunks on VRTX chassis, then set up the VLAN's on the Vrtx switch, VLAN > VLAN Membership > Add

[lmrogers]

If i remember from when I did ours ,setup internal and external ports as trunks on VRTX chassis, then set up the VLAN's on the Vrtx switch, VLAN > VLAN Membership > Add

 

Thanks, it was an issue with my LAG setup in the end. Did you setup a Windows failover cluster at all? For some reason I can't get the servers to see see the storage as available to create a CSV.