browolf Posted September 13, 2018 Posted September 13, 2018 (edited) Even after turning spanning tree off we've still got wierd dhcp problems. re: http://www.edugeek.net/forums/wired-networks/199307-ubiquiti-spanning-tree.html Random classroom computers say no logon servers available. My test laptop beside me with /release and /renew takes from 20seconds to several minutes to get a new ip. We've just discovered another situation which might be related whereby whatever switch the internet uplink is plugged into, in the cloud controller, that switch shows it's uplink to be 100mb, even though it has a 1GB uplink to the main XG Situation with internet plugged in [ATTACH=CONFIG]50205[/ATTACH] If we unplug the internet the 1gb FDXs revert to 10GB links and 10mb uplink goes away. Any ideas? EDIT: this seems possible to solve the dhcp problem at least: https://community.ubnt.com/t5/UniFi-Routing-Switching/Disable-DHCP-Snooping-on-USW/td-p/1510229 Edited September 13, 2018 by browolf
forkies Posted September 14, 2018 Posted September 14, 2018 We have had some similar issues, we reverted to an older firmware but that had some other issues. I ended up upgrading to latest firmware, restarting the switches, force provisioning and then rebooting again and so far haven’t had any issues apart from one switch saying a WiFi point was an uplink which hasn’t changed back even when the port was disabled for hours. Network is working fine now just the interface having a winge now.
forkies Posted September 14, 2018 Posted September 14, 2018 Sorry should have said, when we tested the common factor was the 16XG, if an uplink went through it we had issues with the switches below it, but put the uplink bypassing the 16XG into the core and it was fine.
browolf Posted September 15, 2018 Author Posted September 15, 2018 Upgraded the cloud controller and now a bunch of ports that were fine before, now report RX faults. [ATTACH=CONFIG]50239[/ATTACH]
browolf Posted October 12, 2018 Author Posted October 12, 2018 I didn't explicitly say how the problem with DHCP got solved. There's a bug in the unifi switches that whereby when DHCP guard is off, there's some part of it that is still on and that part is still checking dhcp packets and randomly dropping them. So turning DHCP guard on and specifying our dhcp servers magically fixed the problem. 2
PotNoodleTech Posted October 12, 2018 Posted October 12, 2018 So turning DHCP guard on and specifying our dhcp servers magically fixed the problem. Great work mate!! 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now